-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
SailBoat's latest activity
-
SSailBoat replied to the thread M1078A1P2 CTIS Problem.I believe I have found it the fitting that runs the air into the hub before the seals has some sort of brass filter looking thing in it...
-
-
SSailBoat replied to the thread M1078A1P2 CTIS Problem.Also forgot to mention I did take apart pcu and saw that one of the metal circles around the brass colored circle was sticking up a...
-
SSailBoat replied to the thread M1078A1P2 CTIS Problem.So I took the banjo out and took the line loose from where it goes into the frame and also from where it goes to the dump valve just to...
-
SSailBoat replied to the thread M1078A1P2 CTIS Problem.Thank you the banjo is clear and and it does stop as soon as I loosen the banjo bolt. I will check to see if the lines are restricted...
-
SSailBoat replied to the thread M1078A1P2 CTIS Problem.Sorry about that, it’ll pump the tire up to 83 then it’ll exhaust at the dump valve and the tire will go down to about 60. Then it’ll...
-
SSailBoat replied to the thread M1078A1P2 CTIS Problem.I will try to see if they’ll let me rebuild it if not I’ll get one off another truck that is working. And I agree with you on that but...
-
SThe CTIS is constantly pumping air to the front passenger tire, then when it gets to where it needs to be it’ll start exhausting out of...
