Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
No I'm not blind, I kinda wish I was now because I would take offence to what you said, out of respect for everyone who gave their opinion, I didn't want to contradict anyone? Some people said you have too, and some like yourself said its irrelevant. I checked the rocker covers on mine and...
Here are some pics after I picked up my truck from the fab guy I used. He did a mirror image of the fender support for the right side. He also made the exhaust mount that welded up to the support pipe right on the bottom. The airfilter and tubing he ended up putting a bend in it to make it...
yeah its half inch, I talked to a cummins mechanic and he said it would be fine? I see your point though, I didn't see any smoke what so ever. I'll probably end up making another line then, great!
Well I finally got it done just about, just need to fab an exhaust mount, going to my fab guy to do it should be fine driving there. I also want to get the boost guage on there with a pyrometer, it seems way cooler than before no black smoke under load acceleration. I put a 17 fuel button...
I went ahead and installed mine backwards, like one of the other fellas on this thread, somehow the manifold would hit the coolant housing so I mounted it reversed, I drilled some holes for the guide pins on the head. I went ahead with a 5.5" 45 degree intake tubing with a .5" reducer but I'm...
Well finally started putting my turbo in, I ended up going with the backwards set up with the intake side of the turbo to the back like someone had done earlier in the thread. I had to mount my exhaust manifold upside down to make the turbo clear. Putting a new 4LHR turbo on mine. I have 3.5"...
thank you so much, its little info like this that can save me a whole day of looking for crap to fit at home depot or something. and on the intake I'm going to see if I can use the original intake tube off the air filter and go from there.
Thanks again so much, I'm begining to love this...
Ok got my turbo, apparently its a 4LHR, I got my #17 button, I'm going to be probably using oval 3 1/2 tubing for the cross over making it go back by the firewall and into the intake side switching it back to 3 1/2 round tubing. I was going to start the process next week after this weekend with...
Ordered my 4LHR borg warner turbo today after talking to several people. apparently its good for 325 hp. I bought a #17 button from cummins, along with a turbo exit pipe with a clamp and some new exhaust manifold gaskets. Still gotta find where the **** button goes! lol Also I'm going to use 3...
yeah I understand that but with 53" tires my gps shows 72mph on any empty highway @2100 rpms. slightly down hill though. I just need it to get up the hills, I definitely "need" the turbo.
On the turbo unit I want to go new, I know most of you said just find a donor motor and go to town with...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!