-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Scoobyshep's latest activity
-
Scoobyshep replied to the thread No AC output.A sliding block. Something that physically prevents you from closing both breakers at the same time? Sent from my SM-S908U using Tapatalk -
Scoobyshep replied to the thread MEP004A Voltage Regulator/Exciter BBQ.I am following the design in this thread...
-
Scoobyshep replied to the thread No AC output.loosten the top nut rotate the bar clockwise, tighten nut.
-
Scoobyshep replied to the thread Converting a 005A with a Digital Controller.I am glad you posted about the temp sender i was having the same issue and hadnt dug deeper into it yet. I ordered one from china...
-
Scoobyshep replied to the thread MEP004A Voltage Regulator/Exciter BBQ.I would say your voltage regulator is done. I know a couple of members here that have rebuilt the existing a direct replacement is...
-
Scoobyshep replied to the thread No AC output.your lockout physical interlock or manually applying loto?
-
Scoobyshep replied to the thread No AC output.Ground loops do weird things. you should have 4 wires from the set to the house. if there is no switching of your neutral connection...
-
Scoobyshep replied to the thread Converting a 005A with a Digital Controller.I am glad you posted about the temp sender i was having the same issue and hadnt dug deeper into it yet.
-
Scoobyshep replied to the thread MEP004A Fuel Pump.The second fuel pump is not for performance it is there for redundancy. They can run just fine off of one. I'm getting ready to...
-
Scoobyshep replied to the thread MEP004A Fuel Pump.It'll run just fine with one pump matter of fact I've seen them run with just one pump quite frequently because people don't realize...
-
Scoobyshep replied to the thread MEP004A Fuel Pump.If you need to buy a second pump make sure it is a feed through if you are running two pumps Sent from my SM-S908U using Tapatalk
-
Scoobyshep replied to the thread MEP004A Fuel Pump.did you pull the slug out? theres a steel piston in that tube that needs free. that tends to get glued up. I in extreme cases have...
-
Scoobyshep replied to the thread Mep003 voltage drop after 7500w.On this set. The bigger brothers work differently Sent from my SM-S908U using Tapatalk
-
Scoobyshep replied to the thread Mep003 voltage drop after 7500w.He would be the better resource here. If it were me and I were troubleshooting I would measure the field voltage and observe it as the...
-
Scoobyshep replied to the thread Mep003 voltage drop after 7500w.Yes. Avr= automatic voltage regulator Sent from my SM-S908U using Tapatalk