Recent content by Seth_O

  1. Seth_O

    MEP 016c connection help

    That got me up and running, really appreciate your help. As do my wife and kids ;-)
  2. Seth_O

    MEP 016c connection help

    I think I can power just the necessities of my house (well pump and fridge) with this gennie. But I need to get 120/240 out of it for that to work. I understand to jumper the connections, from there L0 should connect to the house neutral?
  3. Seth_O

    MEP 016c connection help

    I haven't run any other loads. I have tested the convenience outlets with the multimeter and have good power on them. Mains power is disconnected via the cutoff breaker at the top of the box. I am feeding power in via a 240v breaker on the panel. Once I jumped ground to L0, I did NOT connect...
  4. Seth_O

    MEP 016c connection help

    I've read through countless threads here and on smokestack and cant find a solution. I'm trying to hook my mep016c up to my house. I've disconnected mains power, and have connected a jumper from L0 to the frame ground. I am getting ~120v on BOTH L1 and L2. I am running L1 and L2 to each of my...
  5. Seth_O

    Stuck Winch

    I thought about that, but since it was a question mark vs a period, I went with gerhardt advice and jacked up one tire. Sure enough it spun slowly as it came off the ground and I was then able to put the truck in neutral. That allowed me to get thr PTO shaft to turn enough I could put the winch...
  6. Seth_O

    Stuck Winch

    #solidarity
  7. Seth_O

    Stuck Winch

    I tried pushing the clutch in and turning the PTO shaft, no joy there. I'll have to try jacking up the rear axle tomorrow. That's a good suggestion.
  8. Seth_O

    Stuck Winch

    Already tried to remove the shear pin, too much tension
  9. Seth_O

    Stuck Winch

    I used my deuce today to winch my bro's truck and trailer. After getting him back on the asphalt I moved my deuce and heard an unhappy crunch sound. I immediately parked the truck and shut it down to inspect. Sure enough the lever slipped in the cab and it tightened down on itself. Now with...
  10. Seth_O

    RTH No Longer NEEDED - was stuck on I5 in NorCal

    RTH = Real Time Help, 911! ;-)
  11. Seth_O

    RTH No Longer NEEDED - was stuck on I5 in NorCal

    Issue has been identified as a bad oil cooler - cracked and spraying fluid. Anyone have one that can be borrowed, or know where one can be sourced locally?
  12. Seth_O

    RTH No Longer NEEDED - was stuck on I5 in NorCal

    Cheers simp, he's trying to identify which one it is, its a mess of hydraulic fluid though, so its hard to pinpoint it. Will take you up on it though if he can get it dialed in.
  13. Seth_O

    RTH No Longer NEEDED - was stuck on I5 in NorCal

    A fellow SS'er - BigRig379 - had a breakdown on I5 just north of Stockton in his MK48. Is anyone able to help with a tow? Needs to get off the freeway to work on the truck. I don't know a whole lot about the situation (I'm located about an hour away and no ability to move something that size.)...
  14. Seth_O

    HF54 power steering for my M35A2

    I finally took the next step in my journey, I went to 395's. This was one of the main reasons I installed PS. I am so glad I did it, those tires are massive, there is no way I would be able to drive the truck on them without PS. One of my best mods to date for sure.
  15. Seth_O

    What did you do to your deuce this week?

    Wait, could the fix to my bouncing Speedo really be this simple? How much would you say you put in there?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks