Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks to you all. The schematic allowed me to trace the wiring for cb45 to the master switch that would then activate K1 & K2 and with a little inventive wiring it started right up and everything work as it should.
Thanks Ronmar , I did find the schematic after I messaged you and was into the kick plate and didn't see any relays but I will look closer. I check the voltage on the dash switch and found it to be 14 volts -- I assume this should be 24, I will start checking grounds now with the help of the...
First of all thank you Ronmar. I have power at 12
First of all thank you Ronmar. Yes I still have good voltage when the ign switch is turned on. CB 45 has the 24 volts required but my circuit board has no K1 or K2 . Are these two relays somewhere else and are they relays? The master...
ran great --shut it off and one month later no start no gauges batteries up have 24+ volts at the circuit board,12+volts also . Checked fuses good no power at 24 volt ign or 12 volt ign what am I missing?