Recent content by stevenbeven

HMMVW Rims separation & run-flat insert removal + Hutchenson beadlock insert install https://r.tapatalk.com/shareLink?share_fid=20191&share_tid=180488&url=https%3A%2F%2Fwww%2Esteelsoldiers%2Ecom%2Fshowthread%2Ephp%3Ft%3D180488&share_type=t I did this a while back with mine. Certainly was a...

Thanks for the responses, and sorry for late reply. I thought I already sent this in but I guess has been hanging out as a draft. I did use all new HMMWV rebuild kits for all of the wheels. since I had them sandblasted and super clean I didn’t want to be cheap with the rubber. So everything is...

So since ive had the tires mounted the don't seem to be holding air the best. Have a couple that seem to be ok but not great. It takes a few days to loose about 10 lbs or so. Not sure where they are leaking from and have tried spraying some soapy water around them but just not finding the...

@chaski thanks for the tips and I agree, want them to come off when needed but not while driving... Just installed all 4 and looks pretty good. Will retorque in few miles and have ordered some lugnuts that are the same as the wheel nuts so it all matches. One issue already is the **** things...

Hi there, does anyone use thread locker when installing these wheel adapters? About install my now. Instructions don’t call for it but curious if anyone had better results using it? Sent from my iPhone using Tapatalk

Id have to agree with @sharecropper I had a 69 f250 that had 4.10s when I bought it and I swapped to 4.88s in anticipation of larger tires. Yes I was going for the opposite that you’re going for I believe. I wanted to retain low end for Offroad situations for my application. In any case...

Trailworthy Fab - http://www.trailworthyfab.com/Hummer-Wheel-Centers/ Stahl wheel spacers - http://www.motorsport-tech.com/truck_ss.html I recommend calling the Trailworthy fab guys to discuss your application for advice on best / lowest cost options Sent from my iPhone using Tapatalk

I purchased the Stahl whee spacers and waiting for them to arrive this week. It will take about a month from ordering to delivery as they are about 15 days out on manufacturing these. Their spacers are “Hub Centric” which is what you want for safety. This is how an OEM spacer is built as I...

Hey Glock, I do have some wobble after the install but I haven’t found it to be a frighting amount the way others describe. I think the new tie rod actually helps mine a tone being so stiff compared to the factory version. After the tie rod install (before alignment) the steering was super...

Awesome Chaski! That sounds like a safer method with a lower Kinetic energy than what I did. I don’t have an engine hoist so had to go with a shade tree method but glad it worked. Here is the finished product. I’ve got some videos I’ll upload of installing the Hutchinson pvc inserts. The...

Thanks sharecropper, I’m not too Shute about the setup on the radiator honestly. It’s what was in there when I bought it and I didn’t ask about it. I snagged a couple pics though. From the part number pulls up the links below a really heavy duty radiator but deminsions don’t match what is...

Rims after degreasing with wire wheels from grinder / drill then followed by sand blasting. The guy I got my blasted from said the thick caked on grease is hard to get off with sand blaster and would cost less if this was already removed... Sent from my iPhone using Tapatalk

Part 6

Part 5

Part 4 <u>