Recent content by teteacher101

Numbers are tore up, not sure if you can make anything out here.

Oof, I might have to get creative to get in there. I'll check tonight. Thanks

Only numbers I seen were the ones on the data plate in the pictures.

No idea? Anything in the pictures of the data tag help you at all?

No labels on anything, but I did get the wires all routed and installed an I fired it up-no smoke, no fire, and it was charging-so I would say so far so good! Thank you sir! I might have to change the front bolt for the adjustment bracket to a different style head as the bolt I used appears it...

Hey thanks so much for the information, it's helped a TON. Yes, I think the kit was scabbed together as I've gone to the hardware store more times then I can count. The instructions that I had got with it are for a 200 amp dual voltage, I only have a single voltage output (look at my pics in...

1989 M998 6.2 3spd auto Hello everyone, so I could use some help with getting the wiring figured out on my alternator replacement. I originally purchased the replacement alternator and kit some years ago and had it in storage until now when the old 60amp has had enough. The box looked like it...

Try Feltz Tire in Marshfield, WI.

A friend of mine has been using them for years and has gotten several others to use them as well-including me. His family owns a heavy equipment business an they see a large volume of tires in various sizes and brands an they have nothing but good things to say about them. I have been very happy...

There really isn't a way to speed things up with the Government. Just make sure you fill out all the info correctly as mistakes can slow up the process. Then check on the status every 2-3 weeks or so. From the day I won the bid till the day I picked it up on base the whole process took 16 weeks.

Block the front wheels, put the T Case an tranny in neutral, jack the rear end up an try spinning the rear wheels by hand or have someone spin a wheel by hand to see if you can get any noise out of it that way an pinpoint it. These **** things make so much noise running an driving it can be hard...

Rounded an edges knocked down with a sander.

.

Ask and you shall receive! It warmed up to a balmy 10 degrees this morning so I ran out there an got a pic for ya.

Just finished a few things. -Had injectors cleaned, tested, rebuilt as needed -Pulled Y pipe off an had an exhaust shop bend an flare a new piece of pipe on the driver's side that bolts to the manifold as the old flange rusted off -Replaced cold advance solenoid -New prefilter for air intake...