Recent content by THolzknecht

one other thing i for got to mention i used stp diesel injector treatment in it for some odd reason could it be the cause? some people have said it not good to use those fluids in some diesel engines?

how much do the rubber return lines cost ?

thanks for the info gentlemen

ill try to do that after dinner should i put anti seze on the threads or teflon tape?

I recently bought a m1009 with 13000 orignal miles and i have a few questions 1st is i think i have a bad injector front driver side its the only one that wetness around it and then the other day i had pure diesel in my drive way. i popped the hood whiles it was running and it was leaking well...

Question on my battery cable that goes to the starter there is a metal piece that seems to bolt to the frame is it supposed to be bolted to the frame ? what would happen if it wasn't ?

i belive it goes to the starter warthog ill try to get more detialed pics of the glow plug area soon

so what do you think warthog can you give me your opinions on the pictures and eastern surplus just got ten parts trucks my question is will the wiring from say a 1008 or 1009 work with my 1028? is it just the m1010 that's different? are most of the parts are interchangeable?

as far as the glow plug system goes get this i had some starting problems a while back and i asked this diesel mechanic to fix it and he did then he told me that my glow plug module was bad even though it worked fine before that and he did a bypass with out my consent with a push button can you...

here are the pics i mentioned before i dont know if this truck has the right glow plug modual ? and to the left of it is the blue wire that burnt up and some other pics i took off the air filter for a better picture.

thanks for the replies i wasnt acussing anyone of anything. im just here to learn, i am how ever good at following instructions, warthog would you be able to walk me through a diagnoses of the electrical system and the glow plug system ill post some pics tomorrow so you can get a general idea...

well alot of the wires the rubber is cracked and is in a poor state i can post pics this weekend i also had a interesting experiance the other day i went to start my 1028 and i heard a popping sound from the starter soleniod and then i had a fireworks show in my engine compartment i think one of...

Question to all i was wondering if this wiring harness from painless wiring will work for my m1028. http://www.summitracing.com/parts/PRF-10205/?rtype=10

any body know where i can get replacement battery cables for my m1028 all of the cables seem to be beat up especially the part that goes to the batteries themselfs?

my starter went out again and i was wondering if this starter was compatible with my m1028 im also going to get some optima batteries and was wondering which optima's where best any info will be nice? here's the link Powermaster 9052 - Powermaster OEM-Style High-Torque Replacement Starters -...