• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Tiwaz's latest activity

  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    in my case also the rear blower is always full blast and the HI/LO switch only controls the front blower
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    If the valve is like the one depicted in #66, there is no right/wrong way to install it, that is the one I have and it either stop the...
  • Tiwaz
    DREDnot, can you give me a link or more specs on that bulb so I can look for it on the internet...? And why does it need to be REVERSE...
  • Tiwaz
    ok..... ABOUT SELF-CANCELING ok I do have self-canceling and it works very well, the problem though is when you are going straight...
  • Tiwaz
    does anyone know of a turn signal beeper you can adapt to the Humvee turn signal lever or in lu of that, a super bright light so you don...
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    I must say: SUBSTANTIAL IMPROVEMENT in the A/C temperature after installing the valve, also I have to say that previously I had...
  • Tiwaz
    I heard on this video on youtube that the guy fried both the Smart Box and Glow Plugs with a battery charger. I did not elaborate but...
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    I noticed something very similar to that on mine too.
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    ok so just to let other people know: After installing the valve depicted in Post #58 in line, WHAT A DIFFERENCE !
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    does that make it a 3/4 OD...? or even 1"...?
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    do you happen to know the tube diameter so I can buy some clamps...?
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    or maybe just put this valve inline and shut the valve off.
    • 1746621150326.png
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    The Actuator is as forward as it goes now and i have been driving for 30 minutes and nothing, still warm air from the front vents. I...
    • 1000158113.jpg
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    So based on this new picture/names: Shouldn't I just disconnect the Servo from the Valve Actuator, push the Valve Actuator forward and...
    • Heater servo.jpg
  • Tiwaz
    Tiwaz replied to the thread A/C Diagnostic help.
    But if I hook up the servo again, isn't that going to drag the "C" forward and backwards just like it should...?
Top