Recent content by tmallow2004

What is the type battery I need to ask for when I visit some place like Advanced Auto or Pepboys or Autozone - for a Deuce M35? Thanks in advance

Below is a photo of fuel samples I took yesterday. The vial at the left was fuel pulled out of the tank near the top in the fill port using a pipette. The middle graduated cylinder was fuel drained off from the input side of the cheap glass fuel filter the previous owner installed at the output...

Turnerman, The quesion of blow-by came up once. Was something I was concerned with. There is no white smoke, thank goodness. Just the black smoke under accleration loading. Something I understand as more or less normal. So, I'm going to clean out the fuel tank over Christmas break when I...

Thanks for the replies. The in tank pump is working insofar as I can hear it when the rotating switch is rotated down prior to pressing the igniton button. I'm in Florida. Last night it was only in the lower 50s. So, its not really too cold for gelling I reckon. I think, based on other...

I have a M35A that is stalling after a few miles of travel. The fuel filters and air filter are all new and were changed a few months ago after an initial stall problem. The truck isn't driven all that much so really very few miles have been put on it since the filter changes. What happenened...

I see what you're doing. The flasher is driving the low current coil on the relay instead of the lights directly. The relay contacts take the surge. Can you give me a source and model number for that relay? Or rather, a current rating (DC and pulsed) for the relay contacts? Think I may want to...

Where did you obtain your lockers? I would like to do the same thing to my bobbe M35A ~Tim

I have all the manuals. Saw in the -10 65 where it referred to OEI 30. Wasnt sure that correlated to API 30. So was verifying it here. On another point, Ive noticed that the engine sometimes stalls after warmed up and going about 15 minutes. But will restart if I let her rest for about 2...

Thanks, Will. Just little things I havent considered till now. Much appreciated. ~Tim

Hi Cliff, GL sent something Florida doesnt honor. So they are reissuing a Florida title. Should be on the road soon. Incidentally, does the deuce take 30 weight oil? ~Tim

Thanks for all the tips, gentlemen. ~Tim

The M1 Garand is 43.6 inches long, as slung on the mirror. As you can see, the bracket is severely bent. The rectangular mirror is fragmented. I'd like to replace the entire assembly, bracket, mirros and all. But if I can only get the mirror, .. well.. at least i can work with the tubular...

Anybody know a source where I can buy a passenger side door mirror and brackets? Its for a M35 A deuce. Thanks, ~Tim

Deuce axles and posi trac or lockers I have a Rockwell FC240 G7 full floating differential on the front of my M35A customized to a 4x4. Common knowledge, I know. But, my question is have Deuces ever been fitted with posi-trac or locking differentials in the Army inventory? And has anyone tried...

RE: Request vehicle data Thankyou very much. ~Tim