Recent content by tommi3520

Problem is solved, i replaced the worn out flex plate but that was not the issue which i kind of knew (but it was missing teeth so it was due) . What i did was to connect the battery cable first to the 24v bus bar and then the starter cable ontop of the battery cable in the busbar, i had them...

The wires under the dash seem to have nothing to do with it. I had the batteries load tested and they are really good. The truck actually started but it is very unhappy so i need to resolve this before it causes more damage. Im getting 26volts at the positive busbar, also AT the starter Engine...

okay so those blue connectors are what somebody has installed to steal current from existing factory wire it seems, wrong way of doing it, so i dont think i need to worry about deleting those thief wires. Although both batteries are fully charged im going to have them checked for load, and take...

Hi I have a 1986 m1028, i was adding some gauges and also doing a bit of clean up (removing alpine radio with large wire bundle and other old sins) but now it wont crank over, sometimes it does nothing when i try to start (only dash light dampens out like usually) and sometimes there is some...

I ended up just putting a pump between the tanks. the fuel selector thing was to complicated and no good info to find.

thanks for all the info, i think i might just use a pump between tanks and call it good., I will now start to look at which ports on the senders i can use to pump fuel from the aux tank to the main tank. Both senders have 3 ports, i see on my main tank that one is for fuel pump in engine bay...

yes i see, if i just know which wire go to which connectors on the switch, then i can do the rest, with the gauge, i dont think ill run into any problems. its a new gauge from autometer that ill be using with the extra tank and comes with wiring diagram, and on the sending unit side, it should...

Yes the plug, plugs right in the fuel selector. the wires from the plug to the switch is what i need to know how to wire

WWRD99 i should have mentioned that i will have a separate fuel gauge for my extra passenger tank. nyoffroad why do i need a donor truck?, having all the parts, do you mean to see the routing and wiring? My question is the wiring and fuel hose routing, see picture, this came oem in some...

Hi I have 1986 cucv m1028, and im going to add antoher fuel tank on the passenger side, the parts that i have oredered are: -The tank -Hardware to mount it to the frame -Fuel hole in bed (cut from donor truck, welded to my bed), fuel filler neck and everything to put fuel in the tank from the...

Thats the thing right there man. finally somone that has tires to do something!

Re: RE: Re: RE: Re: RE: Re: RE: Dodge w250 Ok, so these parts should fit my truck? http://www.rustrepair.com/repair_panels/onlinecat.htm?r=ru&p=sm (81-93 Pick Up/Ramcharger)?? Tomas p.s. this is how my truck looked like when i left my garage few days ago. When i bought it the frame it self...

Re: RE: Re: RE: Re: RE: Dodge w250 Ya okay i´ll stick with the 727, i think thats the best choice. I also need this plate right here, do sombody sell those? (waiting for the links) TB

Re: RE: Re: RE: Dodge w250 thx Elwenil, ill be waiting for the links Another thing about my dodge, im pretty much restoring it ground up and my plan is to buy a 318 motor and i have 727 trans and np205. Do you think regarding fuel economy that a 4 speed trans would be better? because im open...

Re: RE: Dodge w250 thx for your answer!, but i didnt find any fenders on my model there. TB