Recent content by tourdog

NO this is not another paint question i is a question about how would a cucv look painted black as base thn green spots as camo . the reason i ask is that the wife likes the camo but i really like the black so i thought i would reverse the colors so if any one can do a photo crop please do so i...

trans line I have had good luck with rubber hose get a good quality hydro line from napa or other store .

plow frame keep in mind that there is only two 1/2 inch bolts . holding them tie down tubs on there the other tree hold the brackets on. I dont think I would relie on 2 1/2 inch bolts for my plow.

well i have been looking for while now cannot seem to find a page about . I was wanting one like the wiki about the gm cucv i was thinking about buying a m880 . i would like to know more about them all i know now is they are dodges . if any can point me in the right direction i can go from here...

tires/load if you want good snow traction put on a good set of 235/85/16 leave that littlle bit of wood in back will do a lot better in snow. now about that little load i thought you said you had a load when you fiil that truck to the top of cab all the way to tail gate then you will have a...

drain also just thought bad battery. if one is bad it will kill the other

drain well when I first got mine the same was happening i found the black out lights were staying on . I woud look for some thing simple first :heater motor , glow plugs relay ,dash light ,something like that.

well all you other cucv's out there this is what I do most days and weekends for fun. I have on my back 8500 board feet of fresh cut oak boards to be taken to dry kiln for my owner's brother-in-law. what a work day love it . I made two trips that day about 45 miles one way .each with the same...

move your truck well send an email to me i live not to far from union me would be interested in talking numbers send it to shon@allenstransfer.com

odd wire maybe the brake poportional valve right there look to see if it hook up

truck so what are you trying to say ? are you looking to buy or sell it ? what is your question .

stacks yaa you have dual exhaust why dont you have dual stacks . ya dual 3-4 inch straight pipe stacks sound sooo sweet nice bark when want nice purr when want .

socket the right otc number is 7158 . any good heavy truck store will have it or can get it . it is diffent from the 1/2 and the 44 . so you should get it in order to get the right bearing tight ness and blablabla.

flex plate there is no easy way to do it . just doing it . but you can get one at napa about $75.00 just be sure it is the diesel one for a 6.2 . then un bolt trans from engine unbolt drive shafts then unbolt the crossmeber slide back 5-6 inchs undo bolts from flex plate put new one in . then...

winch what kind of money are you talking to buy it . i am interested but i am a long ways off i would also have to have it shipped pm me with how much.