Recent content by Usmcsteve

It just drops down and aligns with the gears in the transfer case.

Yes you have to make sure all is aligned with the top of the transfer case according to the number of teeth you have. What I did was took A picture with my phone of the top of the transfer case to see exactly where the alignment mark is and then placed the gear in the transfer case with the...

Anyone have any ideas on where to get a right rear seat base. In my m998 the base was cut out of the vehicle so I am unable to attach the seat bottom

Thanks for the response I finally got it figured out as I thought I had it aligned properly but after taking a picture of it to see the markings I found I was completely off. After I got it in right I took another picture to confirm. Now it’s just on to cleaning and fixing the leaks. These...

When I received my 1993 m998the speedo was not working. When I removed the speedo gear from the transfer case I found the pin to be broken. Bought a new gear and pin researched how to index the adapter in the case and got it all tightened down. Went to drive and he vehicle still no speedo...

I’m having similar problems speedometer was not working when I received my 1993 m998. When I removed the speedo gear from the transfer case I found the pin to be broken. Bought a new gear and pin researched how to index the adapter in the case and got it all tightened down. Went to drive and he...

So after doing the diagnostic testing it turns out the alternator is bad. Any suggestions on where to get one ?

thank you for the quick response I will check into that and let you know what I find

Hello I am new to the HMMWV world on repairing. I have a 1993 m998 and while driving the lights dimmed out and after stopping would not restart. I tested the 2 main posts and only received 25volts and then it dropped slowly. How do I know if it is the voltage regulator or the actual alternator...