-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
WWRD99's latest activity
-
WWRD99 reacted to Commander5993's post in the thread CUCV early Glow Plug burn out - What is the cause? with
Like.
Ok.... I'm even more perplexed now. I just tested all the old plugs, and ALL of them Lit up. I tested them like CucvRUS told me to back... -
WWRD99 replied to the thread Dark Seas M1008 Project.These dorman ones are viton. Used them many times. You'll still need the end caps though...2 of them one for each side. Sent from...
-
I had the same issue when I put my truck back together ( broke the stud off). I used 1/4” all thread and replaced the entire bolt in the...
-
WWRD99 replied to the thread Starter's bracket - M1008 '85.It looks like the bolt you're pointing at is incorrect. It needs to have a stud sticking out of the end to bolt the bracket to. It could...
-
WWRD99 replied to the thread Starting Issues.Sounds like you got a sweet truck! I have small 24-volt solar on mine to keep the batteries charged up. Having a wire get hot when you...
-
I have a 1984 Chevy D30 CUCV 6.2 diesel. I keep it plugged into a trickle charger all the time. The truck will start the first time but...
-
So, been a while since I updated with this thread! After messing with it on & off in-between the 100 other things I have going on, it...
-
WWRD99 replied to the thread CUCV steering column removal.Take the wheel off and tighten this screw. Sent from my SM-S906U using Tapatalk
-
WWRD99 replied to the thread Another Starter!!???.Where are you getting the starter from? Sent from my SM-S906U using Tapatalk
-
Went out to start my M1009 yesterday, after not starting it for about 3 weeks. Had plenty of battery power. Started fine the last...
-
WWRD99 replied to the thread CUCV steering column removal.Did the wiper switch arm just pop off? It just pulls out there's not much that holds it in place but friction. If the lever just flops...