-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
WWRD99's latest activity
-
WWRD99 replied to the thread Ignition Lock Cylinder Replacement.Well I got nothing for ya then. I've rebuilt dozens of these straight columns and tilt ones and never had a problem pulling them out... -
WWRD99 replied to the thread Ignition Lock Cylinder Replacement.Ok did you turn the key to run and pull on it? Sent from my SM-S906U using Tapatalk
-
WWRD99 replied to the thread Ignition Lock Cylinder Replacement.Looks like you took the bolt out that holds it in . Pop the key in and turn it to run and it'll pull out. Sent from my SM-S906U using...
-
WWRD99 replied to the thread Gen1 trouble.New parts doesn't mean working parts. Is it an isolated ground one? Sent from my SM-S906U using Tapatalk
-
It’s a brand new alternator as well
-
WWRD99 replied to the thread Gen1 trouble.Ohh so the switch on the column needs adjusted. Light's work without the key. The metal rod that goes down to it...does it move far...
-
WWRD99 replied to the thread Gen1 trouble.Ok...get away from thinking this is a 24 volt problem. It's not. It's a simple 12 volt alternator that's used in many cars made in the...
-
update still no power at brown wire and no charge. I donno unless someone can help me figure it out the 24volt system is going the dodo...
-
WWRD99 replied to the thread Gen1 trouble.Pretty sure that's what I said. No need to try and nit pick. Actually. Sent from my SM-S906U using Tapatalk
-
WWRD99 replied to the thread Gen1 trouble.The light comes on with the key, and the regulator, brown wire, is the ground. Once you start it, the ground is gone because the...
-
WWRD99 replied to the thread Gen1 trouble.So you do have continuity from the bulb to the alternator plug. So you have to have power at the alternator plug then since you have...
-
WWRD99 replied to the thread Gen1 trouble.Just need to put your voltmeter in between and read what it says. Figure f9 in the tm shows the connection the brown wire goes through...
-
WWRD99 replied to the thread Gen1 trouble.Ok so this makes no sense. If the brown wire has tested good from the cluster to the alternator it has to have power at the alternator...
-
WWRD99 replied to the thread Gen1 trouble.All you need to do is test that brown wire at the cluster to the alternator. That will tell you if it's good or not. If it does not test...
-
WWRD99 replied to the thread Gen1 trouble.Ok so you don't have power on pin 1 on the double pin plug that goes to the voltage regulator. The brown wire. You have power to the red...
