Recent content by Zman498

Also KS on the schematic I posted is in t he middle of 3 and 4, and in section E( shown on the outside of the schematic, like a map)

Hey guys, I need help on my LMTV. So it’s not cranking, but power is making its way around the vehicle, the lights work and all the switches. Where I’ve got with my troubleshooting is at the KS, which is right next to the fuel filter/ water separator, and and close to the starter. Now there’s 4...

struggled with the same problem i just took the whole thing off the generator and locked the filter on are table vice in are shop. Got i think some pliers or a rod and screwed the bastard right off. I've seen one guy ripe one of those up ridiculously bad

So figured out the problem, just want to update you guys on what i found. So i went through the whole circuit for the fuel pump, testing every point with my volt meter and ended up finding nothing which was discouraging. But I was troubleshooting again on it last week and was looking at the...

Hey, good advice DieselAddict. So I went to the wire diagram and traced the circuit for the fuel pump (E2), made sure there was continuity all the way through, and checked if it was receiving DC volts, it wasn’t getting any volts. Also when the gen was on run on the START/RUN switch and circuit...

My mep831a has a similar problem, the main fuel pump is not pumping or making the humming ticking sound its suppose to. Switch it out with a brand new one and nothing. I curious if anyone know what component I can check or what component is responsible for starting up the fuel pump. Notes: Aux...

yes I have the same leak issues on two of my 3kw's. I used RTV sealant on one of the filters an it stopped the leak but not the other one. Did you ever solve the problem? If so please reply or email me at: zimmerman.thomas144@gmail.com