• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by ZZZZZZCOBRA1

  1. Z

    Voltage charging help

    Do you know if that was wire 268? Did you notice more voltage once you did this?
  2. Z

    Voltage charging help

    I am just using that huge factory power wire that was on there that runs to the starter. This was used on the 200 amp I took off. I put a new ground on that is pretty thick wire as the factory ground was two short. Are you thinking that a larger ground wire or more than one ground wire could...
  3. Z

    Voltage charging help

    Here is the link to what I bought and installed. https://www.amazon.com/gp/product/B00OIAB3B8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 I have not checked the voltage with the engine sped up. I drove it today and when moving it was in the low green. Someone on another forum said that I...
  4. Z

    Voltage charging help

    Ok thank you.
  5. Z

    Voltage charging help

    No I did not. I was having troubles with my previous alternator so I pulled that off charged the batteries and replaced with this new alternator.
  6. Z

    Voltage charging help

    Question looking for some help. I was having alternator issues so replaced with a after market alternator. This is where you hook up just the positive cable to the battery and the ground cable. Saved me $600-$700 on the rebuild quote. - When I check voltage across the two battery's after I...
  7. Z

    Transfer case shift question

    Mine will not shift from high to high lock. Shifts to all other positions fine. Any thoughts on this?
  8. Z

    HMMVW roll bars

    Looks good. What size is the main loop behind the C pillar?
  9. Z

    HMMVW roll bars

    Are you going to just connect it to the body or try to hook into the frame somehow?
  10. Z

    Shipping soft doors

    Thanks guys. I went and removed the handles which made my box thinner. Took shipping from $175 approximately to $56.00.
  11. Z

    Shipping soft doors

    How are you guys shipping the soft doors. Put two in a box and the quote is like $175 from fed x for that box size. I see free shipping all over for them on ebay but the shipping would end up costing more than they sold the doors for.
  12. Z

    200 amp alternator question

    Thanks guys that kind of answers that question!
  13. Z

    200 amp alternator question

    Well I am not an expert on these but the alternator tag says 200 amp and 28 volts so that is what I am assuming is correct. Would you agree?
  14. Z

    200 amp alternator question

    Here is my alternator. Just trying to see where i would tap into for the 14 volts unless this alternator does not have that ability.
  15. Z

    200 amp alternator question

    Where do you hook to on the alternator for a third battery?
Top