• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Trailer canvas/trap ID on a M105 bed?

DutchmanZ

Active member
I bought a cover out of a M105 bed on marketplace. The guy didn’t have the sides or bows so it was just folded up in the bed. When I got home and tried it, it’s too large by about a foot on each dimension. Anybody have an idea what it might fit before I cut it up to make it fit?



IMG_7289.jpegIMG_7291.jpegIMG_7290.jpeg
 

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
M35A2 cover??
Mobil kitchen cover?


Looks too big for a generator cover, Evan a dual setup.
 
  • Like
Reactions: 98G

DutchmanZ

Active member
M35A2 cover??
Mobil kitchen cover?


Looks too big for a generator cover, Evan a dual setup.
I don’t leave my bows in the M35 since they are wood but I want to install them today and see. I think it’s too small for it. It doesn't have any windows in the end panels either. I know the Mobil kitchens like the MKT series have a permanent roof panel and separate sides. Wish it had a number on it.
 

DutchmanZ

Active member
I took it back off the truck and inspected it again. No other markings that I could find. I measured the top length at 137” from front seem to back. The sides were 66” tall. It’s definitely too small the the M35. It’s not in great shape so unless it’s something rare, I’ll probably cut it down to fit.
 

juanprado

Well-known member
Steel Soldiers Supporter
Looks like gen set up on the m103 flat bed. Those don't have sides and use long specific staves but normal m101/105 bows. I do not know the p/u # for the set up.

Those are not too common and probably worth more than m105 covers.
On the m116 gen set flat beds ,the covers are rare.
 
  • Like
Reactions: 98G

DutchmanZ

Active member
Looks like gen set up on the m103 flat bed. Those don't have sides and use long specific staves but normal m101/105 bows.
That makes the most amount of sense. The width is pretty close but spacing out the bows further would make it fit. It’s not an option for the 105 bed obviously but on a flatbed, sure. I may just look for another cover that fits and save this one for later.
 

Guyfang

Moderator
Staff member
Moderator
Can you post a picture of the back end? maybe also with the tailgate down? Kinda looks like a ROWPU cover.
 

DutchmanZ

Active member
Can you post a picture of the back end? maybe also with the tailgate down? Kinda looks like a ROWPU cover.
I didn’t get one before I removed it. I can unroll it and take one on the ground or try to put it back on when the weather is better.
 

juanprado

Well-known member
Steel Soldiers Supporter
If I’m not mistaken the m103 generator trailer covers would have the wheel well cut out on the sides, not a flat edge.
I think you are correct so back to the mystery?

Take 2, maybe it is a m105 cover but the staves on the truck have been shortened?
 

Guyfang

Moderator
Staff member
Moderator
This I have only seen on the old ROWPU. But its been I while since I have seen "New Stuff".


1749467718760.png
 
Top