LOCATION??
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Found a gas powered wrecker
- Thread starter turnerman
- Start date
msgjd
Well-known member
- 1,303
- 4,008
- 113
- Location
- upstate ny
old post ... without revisiting the entire string i believe he bought it
turnerman
Member
- 113
- 56
- 18
- Location
- landrum, sc
Yes I bought it to save it. Working on carb then air roto chamber leak. Then a good greasing and lube
- 8,689
- 3,157
- 113
- Location
- Monrovia, Ca.
See if you can locate the Zenith. Night and day difference in starting and fuel usage. Also invest in the NGK/Brent Mullins plug wire adapters.
The next Project an ASMH
And now you is one! . Yep and proud to be one! I am hoping for several more laps around the glowy thing too...
www.steelsoldiers.com
jimmr
Member
- 67
- 88
- 18
- Location
- Hells Canyon, ID-OR border
me too msgjd, blew the rings on a gamma goat returning from yakima to seattle and spent $6 on oil to get it back to base.
turnerman
Member
- 113
- 56
- 18
- Location
- landrum, sc
Got the zenith carb to install. Will have to rework linkages because of the previous Holley swap. Thanks for the plug info. The plugs I was hoping would last for some time because I still have not found a roto chamber I could afford or rebuild seals to repair. I know this if it sits through a rain in the yard it sinks 2 inches in the ground so it must weigh 60000 lb
msgjd
Well-known member
- 1,303
- 4,008
- 113
- Location
- upstate ny
haha it sure seems that way at times, especially on muddy ground .. But M62's are "only" 34500# thereabouts ..
Crazy to think the Western Star tractor w/ 36ft triaxle dump trailer i once ran Tare'd at 36200# .. When parked next to the M62 nobody could ever guess the two were so very close in weight
- 8,689
- 3,157
- 113
- Location
- Monrovia, Ca.
I can take pictures of a stock linkage if you like.
turnerman
Member
- 113
- 56
- 18
- Location
- landrum, sc
Please on the pictures that would definitely help.
does anyone have a lead on roto chambers? Still looking for the one on this m62. Thanks
does anyone have a lead on roto chambers? Still looking for the one on this m62. Thanks
- 8,689
- 3,157
- 113
- Location
- Monrovia, Ca.
I will do that next week. Only there Tu. & Wed.