Search results

Thanks for the replies and the parts sources. I took the side cover and rocker covers off again today. The rest of this is going to cause some of you to smack yourself in the forehead because I know its not right, and about as redneck as a guy can get. But I have nothing to lose, so I did it...

I have the DN2M/LPW2 engine from one of these that I acquired several years ago. I used it to build a home brew generator, which has been working reliably for the past 2 years. A month ago, it had a hard start condition, and would only fire on one cylinder. After a bit of tinkering, doing...

Yeah, the flywheel is a problem. zarathustra was able to help me out with one, as well as a few other parts that came in handy. Maybe he has another one. He is listed above. Once you get the flywheel issue sorted, look at cross reference numbers for starters. I found one for an Onan...

zarathrustra was kind enough to provide a flywheel and some other parts. I suppose an update is in order. I was able to get the engine started and it runs beautifully. Shakes like crazy though! Is that a neutrally balanced flywheel? Or does it have a heavy spot that needs to be aligned on...

Thank you Brian. Perhaps my confusion is coming from the appearance of the plug terminals themselves, since I have never seen this engine in any form with a wiring harness on it. On the attached photo, the plugs have a screw terminal at the top with a thumb wheel type nut on them. My...

Hi. I picked up a DN2M engine that is used in the 802a TQG. The question I have is regarding the heater plugs in the air intake manifold. According to the wiring diagram, these plugs are wired in series. However, I don't know how that would work, because the plug simply has a single screw...

Hello all, I picked up a DN2M engine a couple of weeks ago pretty cheap. The engine appears to have been rebuilt by Lister Petter (fresh rebuild sticker on it) and put on a shelf for who knows how long. It has never been ran since the rebuild and testing, as far as I can tell. The intake and...

Hi. I just joined the site today, because I have a few questions that I hope somebody here can answer. I picked up a DN2M engine for $200 that was rebuilt by LP and never ran, just put on a shelf until it was sent to DRMO. This engine is missing a starter and a flywheel, and the alternator...