-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
O
Re-painting 1998 M101A3
Looking to re-paint my camo 1998 M101A3 to a desert tan color. Has anyone had any issues painting over the CARC paint using standard automotive grade paint? A local custom paint and body shop would be doing the work. When I mentioned painting over the CARC, he seemed concerned about how the new... -
O
Converting Grote LED lighting to 12v setup
Right now I have a fully functioning M101a3 with brand new 24v wiring harness, Grote 82212 tan bucket LED lights, and an adapter to plug the harness into a 12v system (bought on eBay). The two rear lights are fine, but the wiring system is limiting for adding any side marker lights and rear... -
O
New Surge Brake questions
As part of the restoration of my 1998 Schutt Industries M101a3 I have replaced the entire defective surge brake unit with a new one from Balcrank Industries. Decided to go with a new unit instead of just the piston. Got it installed fine, but I notice that the new piston has quite a bit more... -
O
Easy source for M101A3 Brake Pads?
I have a 1998 Schutt Industries M101A3 that I am refurbishing. Pulled the hubs and noticed the left brake pads are cracked; the right pads are fine. Any good civilian source for brake pads that will work including part numbers that are easy to obtain? I did notice the stickey at the top of... -
O
16x8 Steel Wheels on M101A3
This is my first post on this forum. Proud owner of a 1998 Schutt Industries M101A3. Plan on modifying for use as a motorcycle hauler with elevated fold out expedition tent installed with on top with new elevated steel side stakes. Going to be pulling it with an H3 Hummer or Land Rover Discovery...