Search results

Can anyone advise the proper way to test a new gp relay while it is out of the vehicle? Would you use a jumper cable from positive battery post to top lug, then ground out one of the small posts? My gp control card went bad, and I tried to wire the bypass, and it still didn't work. I...

Can anyone suggest a source for a replacement instrument cluster. I know that they are available on e-bay, but before I go that route, I would like to try and send some business to a member from this site, or a business affiliated with the site. Thank you in advance

I don't know how good of a deal this is, but there are 4 humvee wheels/tires on ebay with a buy it now price of $270, if anyone is looking for a set. The pictures look like the tires are in good shape. Hope this helps someone. I do not know how to link the listing, but the listing number is...

When making slow speed tight turns, my 1008 has more inside tire "Skip" or "Spin" than I have been used to on my other vehicles. I believe that this is due to the type of rear differential. Is this something normal for our trucks? Thanks

I am experiencing a problem engaging my 4WD. After changing the tranny filter, changing the tranny and transfer case fluid, and replacing the vacuum lines, the gears pop out of 4WD and grind similar to a manual tranny when the clutch is not engaged. Doing a search of past threads, it looks...

I picked up my 1986 M1008 from Fort Jackson this week, and after some help and advice from several of the members, I was able to get it started. Thank you!. I tried to go for a test drive, but when I shift to Drive, the engine just revs. I tried shifting to the low gear, in-and-out of drive...

:?:I just took delivery of an '86 M1008, and found that the starter had been removed. I have been reading over all of the great information on this site first, then I completed a 24v to 12v conversion and purchased a new starter. As soon as I connect the battery, the starter engages, even with...