Search results

Fdc physical removed, how to adjust fuel? With the hex nut in the back of the pump?

Hello, bought a new deuce today. The last owner converted it to a whistler turbo. It smokes nothing as it is now, and not much more power vs my old cranckedup(heavy blacksmoke) non turbo. I dont have egt gauge yet. But i have a boost gauge in my garage that i propably can install tomorow...

Hello guys, running on filtered wmo and 2 weeks ago it suddenly stoppet on the road. Got it towed home today witm my dodge ram:) changed both secondary filters, bleed the top screw on the filters, got diesel to the fdc, still dont fiering up. Unscreved the nozzle/injector on the cylinder closest...

Hi, was wondering how this system will work: 200l/55gal barrel-oilpump/barrelpump-2xstandard luber finner oilfilter/oilfilterhousing-m35dieseltank. Will i get the worst out so i dont need to change the fuelfilters all the time??

Have claenes all the conector in the fuelpump housing, but still not enough volt to get the pump turning. Tried a wire direct to to battery and the pump started. So i have a bad connection between the fuelpump and ... where ever the wire come from. Where does it come from? :???:

Hello, my fuelpump was not running, the old original fuse was blown, i replaced it with a 5A Slowblow. Still not running, so i connected my multimeter and read 11,6V between fuse conector and negativ ground...hmm..shoud it be 24 v? I got 24v in the electric connector but only 12v inside the...

Hi, i got 2x spot mirrors in the mailbox today, but i dont get ane brackets. How do i attach them to my mirrors? Suposed to use one of the bolts thats on the mirrorbars or what? :)

My exhaustpipe top have been replaced with something that i think is a litle shorter than the original. Im gonne make me a new wxhaust pipe frim the fender and up in stainless steel, but how long should it be from the top of the axhaust heatshild and up? the one thats placed on now are 26,6"...

Hi, was wondering about to put a set of Signal rotating beams i have in the garage, where do you guys use to get 24v for the switch, and where is the best place to put the wiring? a picture would be great :)

Hello. Im a guy from Norway that yust bought a m621 non turbo. I think it smoke very litle, reading here that people says it smokes like ****. The fdc is not bypassed, and woundering if im gonna turn up the fuel a bit. Is it something to adjust on the fdc or should i go straight to the ip...