• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. E

    MEP 806B Low Frequency

    New to me 806B. 199hrs on clock. Added fluids, starts and runs well. Configured board and switch for 120/208v operation and frequency selector switch is in the 60hz/400hz position. CIM displays 54hz upon startup, frequency adjust toggle has no impact on output - up or down. Verified CIM...
  2. E

    Pettibone Crane TM's

    I'm hoping someone can point me in the right direction. I'm looking for the TM's for an old Pettibone RT Crane. Model#15B1WF FSN#3810.00.377.1464 Contract#DSA700.74.C846 Reg#12-31012 Any help would be much appreciated. Thanks
  3. E

    Load Testing Gensets

    I recently purchased several nice sets from GL, two 003a's and one nice 004a. I have been reading the posts in this forum with great interest and learning quite a bit from the very knowledgable members here. I have done quite a bit reading about the wet stacking and am anxious to devise a...
  4. E

    MEP 003A Pre Start Inspection

    Just picked up a couple of MEP 003a's. I've given them the once over as suggested by the many fine contributers to SS. I've replaced all fuel lines with new, after installing new civvy spin on filters. The big question, I've read about some people having seized IP's. Can anyone give me a...
112,789members
166,307threads
2,342,298posts
930online users
Top