Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
...at least for me.
I know the battery discussion has been done many times and it's quite obvious that you can operate without spending on 6t's. But my question here is, is it the best option? In other words, there is a part of me that thinks the vehicle should be set up as it was engineered...
Hi all. Plugging back in to SS and getting back into my trucks after a long year or so absence. Insanely busy work year.
Anyway, the M1078 was sitting for about a year in the lot at my warehouse. Charged the batteries and it fired right up! WhoooHooo! It idled a little rough, but ran for...
When I apply the brakes, they all engage. However, I have a soft pedal, air releases out of the bleeder valve on the tractor protect valve, and I lose air pressure fast. I did have to replace both check valves above the drivers front tire. So, I thought maybe I had crossed a line or...
I went to play with my M1078 today and noticed I was getting a low voltage reading on the gauge. All the battery connections, alternator connections, regulator connections, and battery volts are good. I haven't done all the trouble shooting in the Niehoff guide, but did check the regulator...
I need a BIG favor FAST:!:. I need someone with an M1078 running a WTEC III to get me the part number off their Transmission ECU ASAP. Actually, I need as much info off it as possible. Maybe just take a picture of the data sticker for me. Long story short, I think I might be getting...
Just a quick picking of the brains before I start any unnecessary troubleshooting. I am resurrecting an M1078. Installed four new 31 series batteries, all new circuit breakers, semiconductors, and relays. She's breathing, but won't even try to crank. All four batteries show 12 volts, volt...
OK folks, I'm gonna throw something out here that I already believe I know the answer too, but since this is the first time I've needed one I want some verification.
Are the Eaton CTIS ECU units interchangeable. I need one for an M1078, but have had no joy locating one for anywhere less than...
Just purchased my first LMTV. Not running (no batteries), but tires up. Need it brought from the GL yard on Moreland AVE. to just outside Decatur off of E. Ponce De Leon.
Thanks.
I'm new here and to these vehicles. However, I'm not new to cars; Restored my first car at age 17 and worked in the automotive business for a few years. I also worked on Navy planes for eight years and am currently restoring an M715. My point is that I have some mechanical skills (some - wife...