Search results

My truck doesnt have the antilock brake system but i am thinking of getting it upgraded. There is a guy here locally that is parting out his truck hich has abs and i am thinking of taking the parts fom his truck and transfering them to mine. What parts do i need if i were to do it? Would it even...

I put new seats in the 923a1 a few days ago along with new brake chamber, hood latch, oil pressure sensor and other various things to it. Just my luck when i was taking all the bolts off to the old seat the last one siezed up. Took about an hour to get that darn bolt off. Yesterday i just...

Ok so i figured out the turn signal problem and it turned out to be the housing as said in the previous post. I cleaned the points and it works now! I got another oil pressure sending unit from the guy here in las cruces parting out his m931a1 so i lucked out there. Now the guage reads a...

I have tried multiple bulbs that work in other turn signals on the truck. I thought it had to be the bulb but no luck. Where is the pressure sending unit located on the block for the oil pressure?

Ok well let me just tell you i hate wiring and electrical systems. My truck has got me stumped (not hard to do) but i was going around today fixing and replacing various lightbulbs. When i got the truck ALL the turn signals worked and i am sure of it. So today walking around the truck the left...

I was wondering what type of oil you guys use in these transfer cases? What seems to work the best and leak the least? If i have a leak rather than put a new gasket could i put oil stop leak in it? I dont mind a little oil coming out of it, I would rather fill her up once and a while rather...

Usually it wont work until the truck has built up air pressure just like the wipers, horn, etc... There is a valve that makes the brake system a priority and will only give air pressure to the accesories once all the tanks are full. Thats how mine is. If it happens on and off even with air...

I have found that i can shift my transfer case with NO air in the system, NOT running easier than if i have air in the system. If it goes in fairly easy with no air in the system and if you cant shift it with air in the system then most likely it is the solenoid. Just a thought.

Just last week i had to replace a diaphragm on a service chamber. The service chamber was a piece of cake. I still need to get a new diaphragm on the spring brake side though. What i did was hook up a quick release air coupling where you can pressurize the system from shop air. The easiest place...

Has anyone on here ever did a gasket job on the transfer case on a m939 series truck. Mine is leaking and eventually i want to make it not leak. How hard is it to do a job like that. Do you have to take the whole thing out or can you just take it apart on the truck? If anyone has done this...

I live in cruces.

As far as i know they made very few air lockers and they are hard to find. I wish i had some on all 3 axles that would make me happy. I wish i knew of a company that made some.

I am pretty sure the truck came from that auction since i didnt actually buy it from the government. I bought from a guy who did and he just had the truck for a month or so before i got it. I didnt air down the tires because i didnt have much extra time and it was running at 50 psi and it still...

Ok so here are the pictures of my adventure. Enjoy!

Ok so i went on a real adventure and it actually did better than i expected. Does alot better offroad than any of my 4x4s. Took some pics but i will probably post tomarrow. ALOT of fun to drive handles just like a sports car. Ha. I saw a guy out there riding a dirt bike and he just had to stop...

Luckily the truck came with a air hose that connected to a glad hand. I am planning on running at 35-40 psi to start out and i will go from there. Right now I am going to go warm it up and get it all ready! I hope everything goes good I havent had it running for more than 30 minutes at a time. I...

Yeah i have heard about the t case getting split. I havent done it and dont plan too. Maybe tonight I will take the truck out and do a little off roading. Dont worry I live in the sticks and i wont be near any houses or people. We have alot of sand here in new mexico and want to see how the...

Ok I just didnt want to drive it if I was going to lock up the brakes. Before I drive it I will make sure the brakes are 100% but im sure i will get the hang of it. Oh I called our local truck driving school today and i plan to enrole in january. I cant wait to drive it.

Ok so i went to a big rig shop today and got a number 12 diaphragm but unfortunately they didnt have the 16. So i went home and put the diaphragm in which only took about ten minutes, which was faster than i expected. So i put everything back together and aired it up. No leaks coming from the...

Cool fact. Is it true in the marine trucks with axle lockers, you have to coast around corners when on pavement in order to have some give in the locker?