Search results for query: HMMWV clutch fan

Yet another request from the collective on a shortcut or procedures to help me save tearing up my hands, destroying my radiator, or breaking my fan. Once the Florida Inferno subsides in 5 months, I am going to replace all the V-Belts on my M998 6.2 NA and replace the Fan Clutch Host with one of...

I don't see why still couldn't run your 4000 Watt Inverter, I'm running my 24v 3000 Watt Inverter on my starter batteries with the 200A Generator & Also running a 6000 Watt Inverter off my 6 battery bank that I placed in the back

how much of a project is the 200A swap? I had hoped to keep the 400amp and use it with an Outback 4000 watt inverter I have to create some usable AC. If the biggest drawback is parasitic drag and tight clearances I’d really like to make it work. Seems like the 200amp swap is at least $1500...

Yes. Not fun but can be done. Mine was rusted and leaked. This is the replacement that i ordered and has worked fine since. Post #: 5,924 https://www.steelsoldiers.com/threads/what-have-you-done-to-your-hmmwv-today-lately.147917/page-297#post-2451121 Also, this helps while trying to seat...

Thank you for reading everything and giving your advice. I’m going to have to get the gauge but this hasn’t worked since I got the truck 2.5 years ago. I did waste money just replacing parts like an idiot. 2 Cadillac valves,time delay,hoses from Cadillac valve water crossover sensor lol and 3...

Yes, I've read every post in this thread. It does jump around a bit to be honest, and with everything going on, it seems that each of the individual pieces of the system pass when tested individually, but that overall the system still doesn't appear to function properly. At nowhere that I read...

I changed the parts 2nd Cadillac valve and fan still stays engaged. But if I hook my air compressor to the shrowd I can get it to free wheel Sent from my iPhone using Tapatalk

The only components in the fan system are the fan clutch, time delay relay, Cadillac valve, temp sensor on the crossover pipe and the switch on the injector pump. During nomal operation below 185 degrees the Cadillac valve is energized passing power steering fluid to the fan clutch to disengage...

Great info! A couple quick questions on your setup. What compressor did you end up going with? And the crank and water pump pulleys, do you have part numbers or where you obtained those from?

What are you doing for lights? High beams on, I bet the stock lighting circuit draws 20A at 12v. For OP (converted to 12v), I would recommend what others have suggested. Try to find a 6.2/6.5 in a junkyard with brackets for an A6 compressor. You'll need brackets shown at the link below...

Thanks, did you run an air hose to it during the procedure? Or did you just spray it, let it sit and then hit it with the hammer and punch?

You could look at my clutch unsticking procedure here.. But use your best judgement. I probably would have gone with a less aggressive punch when whacking my clutch.. But it freed it up,, https://www.steelsoldiers.com/threads/what-have-you-done-to-your-hmmwv-today-lately.147917/post-2308819

Update on Bowtie Overdrives: I have been unsuccessful in getting any monetary help from Bowtie Overdrives. I paid a reputable shop to install the trans purchased from Bowtie. Bowtie claims we did not follow their warranty instructions by providing line pressures and other items to make sure it...

I believe that is a HMMWV coolant crossover manifold. I have brand new ones in the plastic. Do you like that? It does the same thing as the CUCV. It is far from the position to put a temperature gauge sending unit. Head temperature is the place you want to tap for an accurate reading of engine...

. I have to agree with @Sharecropper ... Heck of a good write-up @Barrman ! It they have anything at all that will solve the problem - just based on being able to talk to the guy you talked to 5 years ago - I would be willing to spend more money there!

I did some more research about engine braking with the 4L80E. Then I read through my Compushift 90 page manual and found an option for locking the torque converter in any gear. That made me curious so I called them up. I bought their transmission control module 5 years ago mostly based on the...

The black kettle looking thing by the firewall with the sight glass on it is your power steering reservoir. Power steering pump does a bunch of jobs on the HMMWV, it also powers your brakes and the fan clutch so make sure it's topped off and functional. It uses dextron 3 (basically ATF) not...

You need to pick up the brake light signal under the dash at the switch, after that it goes through the turn signal switch and is useless for that purpose anywhere under the vehicle. I have no idea why you would want to disable the TC lock under full throttle, on a long hill for example you...

Update on the swap. The trans had to come back out and be re-rebuilt. I drove the HMMWV less than 100 miles. Reverse started slipping. Felt literally like a badly slipping manual clutch. When you selected reverse it would barely make a shifting noise and barely move. I talked to Bowtie initially...

The "civy" pump (metric Saginaw P series) is the same the only difference is the pressure relief valve, I used a rebuilt (Cardone) one for 3 years on the Detroit before going to the remote type when re-powered with the GEP turbo. The only thing I did was use the pressure/flow tune up kit...