Search results

Sorry about the delay, I had to drive to Oregon to pick my son up from Winter Encampment. While I was gone, my stepson went through all of the tests in the TM. All of the wiring checked out. The solenoid and temp sensor were replaced, all tests indicate the GP card is the issue (which was new)...

did this issue get resolved?

So we just got done checking continuity to all of the glow plug wires (Including the temp sensor) and all are good. we just pulled the temp sensor out and will be checking it to (and probably replacing it as they have one at the auto parts store, we are heading to for some maintenance items for...

Marcus, I will check all of the continuity checks you listed in the morning when I can see. This has been such a pain in my A-- that i ready your reply and went and checked for the 6 prong grounding post. There is nothing attached to any of the 6 prongs, only the one wire that is attached to...

Marcus, I checked that this morning. There is no continuity of the 4 terminals of the ST85 to the attachment plate of the ST85. I just pulled an ugly mess of glow plug wiring harness that one of the PO's put in (for which we can't figure out why as the factory harness was still intact and just...

As I sit and pile through information and previous threads.......the ST85 is all metal. Does that mean it is grounding to the body? What have others done to remedy this since this appears to be commonly used replacement for CUCV's?

I am writing this after dark and will add pictures tomorrow but hoping for some insight/help in the meantime. I decided to replace the glo plug solenoid (old black plastic one) as a precautionary measure as it had not failed yet. I purchased the Napa ST85 and within a few minutes had it changed...

Today she got some new shoes

The glow plugs are 12 volts. The only true 24 volt component in the CUCV truck is the starter

(2) Marketplace - 1963 Dodge M37/M56 | Facebook

So back in March, I installed the LMC dash. I am Pretty happy with the fit and it survived a Sacramento summer without warping or cracking so I am happy with it so far.

Cool and I like these, but I don't think they would work on the rear with the dual tires unless you get spacers, which brings on its own set of issues.

I run 255/85/16 tires on my 1028 without rubbing. They seem fine and are roughly a 33 inch tire

Awesome Ken...amazing what the MKTs are going for at auction now. No more $500-900 deals LOL. That's great that your close. There are a couple in Washington I know of and at least one in SoCal that is being used as a portable soup kitchen. Holler if you are looking for anything MKT as I have...

In please

Hang in there!....Someone will suggest something. You have done fabulous work and are an excellent trouble shooter. It will work out

Thanks All....I will pull them off s they serve no purpose for me and are not military.

Hi Experts.....I have been wondering for a while what these brackets might be for and finally took pictures to get your expertise. I think they may be for a PTO set up, but I don't want to guess. There is one on each side, mounted to the frame. The history on my M1028 is that it was with the...

Nice....thanks for sharing

Mine is the same way. I am guessing that those are for structural integrity of the tailgate as it is two pieces , not including the top and bottom caps.