Search results

Ok just checked the ignition switch and there is power in the red wires. There are 2. One in the black connector and one in the blue connector. Both are live so I need a switch. Kinda odd both columns do not work.

no power in the fuse panel at all except lights. I switched out the column for a known good one. I need to find out what one or ones are the main wires to the panel. I have a hard time reading the manuals. I think the problem is somewhere in the firewall connection.

Ok a little info for you guys. I needed a new engine and cab wiring harness for my m1028 because PO owner hacked it up. This is the 2nd time I have done this swap. The new/used harness is complete and not hacked. I also took out my steering column and replaced it with a known good one, because...

I read somewhere that you can clean them. Usually they won't even work. All you have to do to test the, is to ground them out and put power to the terminal.

Your posts today have been great. Keep up the great work.

nice update

that is 1stsarge

It's made by eagle bobtail lots of info out the on them.

How come the st85 are so much money? napa wants 65 dollars. What is the difference from using a dog head relay or any other starter relay?

I actually got that thing running in less than 3 hours I had to run my own wires to get it to start. That truck is long gone, but it did get save and not parted out for axles for someones stupid project. The truck was 100% gone through and someone wanted it more than me. I am currently working...

With all of the recent threads about previous owners Hacking stuff up, I think we should post up some pictures of these geniuses work. I have bought 3 cucv that were total hack jobs. Mostly wiring nightmares. here are some of the things i have found. complete butchered up harnesses, Made their...

So wait....there is a thread that has Frequently asked questions? Something that important should be first it the threads. possibly a sticky.

that is what i am doing right now. if people would just leave them alone and not re-engineer the wheel, there would be a lot more cucv's around.

Yes there are a lot of stupid people out there. You should see some of the nasty things they did to my 08/28 trucks

What you need to do is find out if your system has ben hacked. It sounds like they did a 12v conversion. Once you find out what starter you have report back. it should be stamped 12 or 24.

my brother broke a ubolt, and every leafspring in his 3+3 camper special 10k gvw

This story sounds like it is right out of the original Dukes of Hazzard.

Yes can you please post as many pictures as possible. Im an making a mount for mine to use a RT3. Did you happen to buy it used from a guy in MA?

I would take the wheels off and call it art. A nice lawn ornament.

Move timing mark 1/16 to drivers side and turn the pump up by 1/8