Search results

This paint does take a couple of weeks to cure out, bake it in the sun as much as possible.

Thanks for the link DH ! Thanks Ron. My m246a1(so the story goe's),came out of North Carolina somewhere, ended up at a yacht brokerage yard in Tampa Fl, a guy over there bought it and traded it to a member of ss over here in my area, and i traded a m109 and some stuff for it. This is next years...

Out of all the pictures I've seen of the m819's and m246's, there were none that showed the trailer hooked up to the wrecker, anyone have pic's of the combo? Here's my m246m1 with mack motor,everything works!

Sweet! Im getting my camper ready for the Ga rally also!

Welcome from Sanford! Jacksonville is my home town,i grew up there. Have fun with your new deuce!

Weather held and i was able to finish everything except the back, 90% done!!

I'd fix it if its not too far gone. Look closer at the pic's, it's a trailer with m109 windows! :-P Do you have a pic of your m109 you can post?

Thanks for bringing this up , i was close to posting some pics of some recent progress made,though not alot,because of having spent the 10 months working on the deuce road tractor. But anyway, this weekend i plan on finishing the paint job. Fabricated and installed both generator box...

Installed one on my deuce tractor and my kit was missing u bolts also. I found a good replacement for the stock u bolts were 3.25" muffler clamp u bolts,i used the cradle part of the clamp up against the cab for a spacer between the cab and pole ,otherwise the soft top will be pinched. I also...

Some of us that live east of Orlando are planning on leaving early on Tue the 8th and heading up i 95 north, it's a possibility that we'll head up as far as16 and then over to Union Point. There is another route we could take,it's not yet decided,but want to avoid too much stop and go traffic.

Nice work Dave. Keep up the good work!

The possibility that parts would be cheaper and readaly available is intriguing. Doe's a servo system use a double, or single piston wheel cylinder? Could the stock backing plate be converted?

Drilled out to accept a ss 5/16" bolt, shim , two different style hinges.

I just went through all of these door alignment issues with my my road tractor project. Having stripped everything on the doors down, and using parts from other trucks,i ended up with a way less desirable fit. I found that there are two different style hinges, one style have 90° limited throw...

1 xl black with white letters please. Short sleeve.

You wouldn't want to tourk that inner spindle nut any tighter than 50 lbs.

If the vibration occurs while in gear,check all of your drive shaft flange bolts.

Those are 1/4" letters.

Can you make stars??