Search results

Recently purchased 68 Kaiser M35A2. Horn did not work at all. Tried troubleshooting using TM's. While checking for voltage at solenoid per TM, observed one of the wires was disconnected (1st clue). Plugged in and horn immediately went off pretty much making me deaf. Unplugged wire and horn...

Interesting you mention that. My compressor kicks on about every 5 minutes even though nothing is running such as using brakes or wipers etc. I don't hear an air leak anywhere? Is it not normal for the compressor to cycle every few minutes when nothing is actually being used?

Thanks for all of the info. Belt tension and deflection seems about right. Belt looks in good condition. It builds and holds pressure normally. I'm not gonna tinker with it. I'm going to subscribe to the "if it ain't broke don't fix it" theory for now and let it ride. I'll keep an eye on...

When the air copressor is not running, the belts are tight and rotate normally/smooth. When the air compressor kicks on, the belt that drives the compressor starts jumping around as if it is loose. It doesn't jump off the pulley or anything, the belts flex and jump in the center between the...

Thanks for all of the ideas. I wound up using Pliobond, then added the aluminum large head rivets as suggested. Worked out great. A bit of touch up paint on the rivets, can't even tell. The plastic siding cut to size worked out really well for the plastic channel substitute/replacement. This...

Thanks Zak!

I checked the archives on this topic and found a few ideas from back in April, wondering if there are any new ideas. I have a soft top in decent condition, however the front sewn edge at the windshield has come apart and the plastic channel piece that secures the top and goes in the windshield...

Yes, those are the ones. Thank you very much! I will try those sources.

Anyone know where I can get the small clips that the screws on the dash guage panel secure to? Looks like the screws have a t-handle on the end of them which when turned right/left into this clip snugs the panel corner up. :roll: