Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
TO all those that can and interested - come Monday here is your front row seat ticket - if you feel obligated that you should pay for a front row seat - DONATE or CALL - easy as apple pie.
http://www.legis.ga.gov/Streaming/en-US/Both.aspx
Start looking up your House Representative here in Ga...
Yes - works with all of them
Swiss - if you keep turning the heat down here in Georgia outside it will be a long time to get done - turn it back up to the 60's please.
As for the guns.
I have about 6 or 7 guns from cheapo to really not cheap (over a 1k figure) BUT this is for the folks who...
Here is a knucklehead tip for ya:
Ever have a skin form on the top of the paint you have used - went back to it a week later and that skin has formed (do not get off on a tangent that I said SKIN please).
Take a piece of aluminum foil - sit a paint can on top of it - cut out the circular...
These are great questions and you can also see some past and or present painting experience when these are asked.
IF - I were painting Urentance - Epoxies - Synthetics etc - that stack of paint mix cups disappears quickly as I mix per the instructions with no twitching on the mixes.
With this...
It just take time is all - everything is a learning curve - just hang in there.
For about two quarts I use about a 1/2 cup of water (water based paint and water clean up)
Need to watch this though - water takes longer to evaporate than chemicals. While stirring it and reducing you want it...
Understood PT and it was taken that way as well - seeing as I had many pre-contact struggling through it all when first initiated is when I was "advised" of a lot of smaller detail that was soon to become unleashed amoungst us. I just as soon not go into it all as we have far surpassed this in...
Now you know why I don't like my picture taken - it makes me look goofier than I already am - especially when cut and pasted - kind of like my hair. It is funny tho aua
Poking the bear
Bear was already poked before this started as it was advised to me from the higher ups they were already investigating this issue. The only problem was - no one knew about it and if they did it never got mentioned.
We had no forward movement till I received a denial letter in...
Mlbhuntress - hang around and please bear with us as this has been a struggle and still is.
The GA law is very clear in the Code of Regulations - what the DMV has done could be starting to get rectified as I had previouisly stated many posts back. As in - the DMV was now aware of the mistake's...
MLBhuntress - FIRST - start by reading this entire thread from post #1.
2nd - contact Swiss to donate to the lobbyist.
3rd BEFORE Friday -call your district Senator and ask them to pass SB 392
Your asking questions that are all answered here already - no more than 100 folks to get this passed...
Read the Header under the SB 392 - just so you have full attention - if this does not pass it is dead for another full year - CALL YOUR SENATOR BEFORE FRIDAY EVENING IN GEORGIA
SB 392 Note: This bill will no longer be...
PB - send me your fax number - I have the drawings ready for you that show it BOBBED like you mentioned yesterday you wanted to do. Needs your approval.
If you speaking of the two motors behind the metal panel above the passenger and drivers head area - when turned on these are to be blowing air into the patient area into the vent tubes.
If they are blowing the wrong direction - its either wired backward - squirrel cages on reverse.
ALL the Georgia folks who come to the cookout - we need you contacting your district senators to get SB 392 PASSED - this comes to vote on Monday March 3rd - we need your call before the end of this week into them.
Please make that call - if you need to find information look at the Thread going...
Tin Medic - at least the pic's were not pink this time.
Busy yesterday at CAMO and got home in enough time before the squirrels arrived to cook their dinner and help with homework. Got a few things done I have been putting off but not working on the paint.
Rain today and by the puddle under...
Absolutely before Monday its time to make those calls Georgia members.
Lots of folks if they can please report in on this thread that you have made contact to PASS SB392 on Monday.
It costs you nothing but a few minutes to make the call and here is the list you can find out whom your Senator...