Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hi.
I have a question about DC power cable p/n: 10570-0705-A021
Is the brown wire used to supply 14V power when the ignition is turned on?
Where in the HMMWV is the best place to connect this and the other wires?
I found information that the red and black wires are connected to a 28V power...
Hi.
I have a question about 10570-0705-A021 cable.
It has red wire which is +28V, black wire which is 0, and brown wire.
Red = Pin B
Black = Pin A
Brown = Pin C
Pin D is unused.
Where is the best place in Hmmwv to connect this cable? Red/Black can be connected directly to the battery, but...
Hi.
I have CD-82/VRC unit, but currently I don't have a power cord yet.
I would like to test if the unit is operational or not.
In power socket there is a pin B and pin A.
From what I have found A is a + and B is a - on the unit, right ?
What voltage (24V or more?) and current from the DC power...
Can anyone help me value the above-mentioned radio?
There are two:
1. Visual condition 1/5, technical condition: almost certainly not working, so only suitable as a “dummy” item or for spare parts.
2. Visual condition 4/5, technical condition: unknown.
Pics for attention:
Can anyone help me value the above-mentioned radio?
There are two:
1. Visual condition 3/5, technical condition: almost certainly not working, so only suitable as a “dummy” item.
2. Visual condition 4-4.5/5, technical condition: unknown.
Pics for attention:
Hi, I'm currently putting together the equipment I want to install inside. I'm looking for inspiration on how to arrange it - hence this post.
Please post photos of your interiors hmmwv where you have installed radio stations, VIC intercoms, blue force trackers, and other stuff.
If you have any...
Hi.
Long story short...
During normal, quiet street driving at around 40mph the temperature started to settle around 210-215F and next to 220-225F. After which the fan would come on, the temperature would drop to 210-215, then rise again after a while, and so on.
The coolant level was ok, so I...
Where do you connect into the electrical system so that devices are only powered when the ignition is switched on, e.g. a phone charger.
Is it somewhere just behind the "ignition switch" or somewhere else?
Hi.
I have replaced serpentine belt 2 months ago.
With the new one I drove maybe 100km.
I noticed that grooves appeared longitudinally on the smooth side of the belt.
Is it ok, or there is something wrong with something?
Hi.
I have a problem with the speedometer on my m1152a1.
What I have tested:
1. I unscrewed the tachometer generator (#12480922)
The plates were bent so I squeezed them.
2. I put the pin (Sender Tachometer Generator?) to the drill
3. The moment I switched on the drill, the pin started to...
Hi.
I have a question about some M1165A1B3FK5 parts.
I am looking for:
C-pillar with all element from picture:
Connecting bar and plate:
And the side that joins the pillars and roof:
Don't know if the element above is directly connected to the roof?
I tried to search in...
I have broken threaded end in hose and I would like to order new one.
But I have a question about "something" inside. Looks like some kind of ball.
Is it a component that should be there, or has something blocked the opening?
I tried blowing it out with a compressor but there is no flow at all...
Hi.
I have checked few TMs and didn't find any A/C compressor schema with the nut for #12:
Compresor model: ogura clutch hr-mg22-2
Do you know which part number or size is it?
Do you think that once the new bolt is in place, it will all ‘stick’ correctly?
is there just a missing nut or...
Hi guys.
I have a plan to convert my M1152A1B2FK5 (2 seats and hard top) to a vehicle similar to M1165A1WB3 (4 seats and hard top, without slantback).
I need to buy 2 rear high seats with bases and risers.
I also need to buy rear seat belts.
I found something like this: HMMWV FRONT & REAR...
Hi.
I need to replace tensioner and belt in my 1152A1 with A/C (S/N 251798 ).
I have checked many shops and ebay auctions and I see that there are very big price differences there. From ~70usd to 600usd.
I also found some copies in china shops for 60-70usd. So probably those with low prices on...
Hi.
I have a problem with the gearbox or reducer in my 1152A1.
When I was accelerating the vehicle it suddenly disconnects my drive, it looks like I put the gear in N while driving. I have had the reducer set to H and D (in a circle), the situation has happened twice. The first on a tarmac road...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.