Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I spoke with Whyme today. He is planning to pickup a used line from Mark and replace it tomorrow. After a bit of conversation he mentioned this is the second line he has had break on the truck. I asked if it had the line separator/isolation dampeners and he said no. I would summarize that that...
Manstein, Thank you very much for your contributions to this site. It has made a difference in many peoples situations/lives.
USAF. Thanks for stepping in where it's needed. Your new position on this site is an honorable task. God Bless ya.
PB, that explains why you have Estwing...
The NHC motor has less than 400 psi in that fuel line.
The LDT injector line should have 2800-2850psi in it.
A 1/4" brass ferrule connector may get him home, but it would be a temp fix, at best(IMHO).
Sounds like you have a fuel leak allowing fuel into your crankcase. The usual places are, FDC(bypass it), Hydraulic head(replace the 3 o-rings), or Boost pump(replace seal).
Each one of those is easy to visually test. There should be plenty of threads that cover this, or someone can talk you...
This is kinda like saying, if you eat alot of Taco Bell you will get diarrhea. If you take a bunch of Tums it will help. But if you just don't eat at Taco Bell (you have other better choices that may cost more), it's a non issue.
You could just charge each battery separately after each use...
Since the poll results show half the members that voted, feel that following the rules(or breaking them, depends which way you say it) is not important enough to have consequences'(if you break them). It's no wonder I spend so much time dealing with such stupidity.
Also I could summarize, I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.