Search results

1167 REVB for reference Truck had all the wires from the KDS SSS box cut in the cab (not the engine harness). Using a tone tester and wiring logic schematic I chased the wiring down to get them reconnected but so far I am not getting power to the IP solenoid even though there is continuity in...

After looking, analong and not finding, I contacted the Power Control Systems (PCS) manufacturer to get the exact info. The first letter denotes engine and the second denotes the production series by generation. Listed as first A identifying Turbo or first B being N/A. 2100-AA: turbo first...

I just picked up a Rev truck and am sourcing parts to make it run again. No transmission or transfer case. I have a NP242 that needs a new cooling loop. It could be rebuilt to work I think. Are there differences in the two cases as far as splines, dimensions, or flanges for the prop shafts that...

Trying to get this thing to shift properly, stuck in limp mode. Codes are: 22 TPS sensor circuit low 73 PCS circuit Should I waste time testing the TPS and the PCS or just replace them? When replacing the TPS, does the new one have to be adjusted for it to work properly?

Just finished putting a used 6.5L N/A into my 2001 M1123. Now I have some blue smoke, maybe it is white, it is hard to tell, once the engine warms up a bit. If I take the cap off the oil filler, there is visible vapor. Is the engine roached or is there something else that may be causing this...

I have an M1123 NARTRON Smart Start System 12480779 Do I need a specific TSU part number to run the motor? Can I use TSU: 2920-01-175-7214 or does it have to be the 12480779-2?