Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have an older M998 and my rubber dogbones for the hood latches need to be replaced. I bought some parts off ebay and when they arrived they appear to be at least 1-2" too short. I don't see how they could stretch to fit without destroying the parts.
It looks to me like there might be a...
I have a new fuel tank, but my drive shaft has the round metal disc in the way.
The disk however is not used for the parking brake (looks like the upgrade mod was performed), it is just still in between the driveshaft and the diff.
I am thinking I can just remove the disc, cut it down and put...
I have a 6.2L 1985 HMMWV (got it back circa ~1999).
I have since swapped the engine and it ran well until recently. :-(
Noticed the lift pump wasn't pushing much fuel so I replaced it and also replaced the fuel/water separator with a new unit and filter.
I also decided to install an inline...
My hmmwv is throwing sparks and crackling smoke from the buss bar area. It starting doing this when I was doing some above normal amount of cranking.
The reason I was cranking it longer than usual was because I drained out some old diesel, put in a new fuel filter/strainer and needed to bleed...
I had a pallet of qty 6 slantback rear hatches complete with all hardware, seals, latches, etc sitting behind my brothers commercial business in OrangePark, FL. All were 3 pattern CARC with "military police" stencils.
Someone came by and stole the entire lot of them. I have some pictures of his...