Search results

Guys i am new to the 900 series trucks, new to the point i dont even have the truck yet. Our fire department has three deuces with custom built beds for fire fighting. I took some measurements to see if the truck we are getting would work with the bed, length is a problem, but we have that...

the zombies are coming, I messed up and the had injection pump fixed, did not time before removal, do I line up the PC mark on the flywheel and the timming pin on the pump? also I know I can be off 180 so #1 needs to be on the compression stroke? right? help me Im gonna get into the beer soon If...

Guys I need some advice. I have 2 deuces that have injection pump leaks. the first leak is the govener spring cap on the rear. can I replace the gasket without removing the pump, and how far will the spring fly out? the next is the Quill shaft cover (laying on the ground looking up at the bottom...

I need to remove the gear pump on the injection pump (the one that boosts pressure) and put a new gasket behind it, it appears to be leaking, there are 4 screws and two bolts- if i remove the two bolts will the whole assembly clear the steering box ? I already removed the shut off cover to make...

I have been looking for hours!! I have a deuce that is making oil, 4.5 % fuel on my oil sample report. the FDC is by passed and I have no flame heater. this leaves the Hydraulic head o-rings and possibly the gear pump, can somebody explain to me how the gear pump can allow fuel in the oil. also...

guy's Ihave a simple question, I need to replace the pan gasket on a deuce, it looks as if there is plenty of room to pull the pan from underneath and get it out, is this correct? anything else to know or check for while im there? thanks!!

I need to send some injectors to the shop to get checked and maybe rebuilt can any one tell me what the crack pressure is on a deuce- I have looked in the manuals but have been unsucessful. thanks!