Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hello,
We have an MEP-009b. All was good but for awhile until one day it would not start using the start switch. However, if I jumped the starter it would start and run as it should. I found the relay/circuit breaker hot in the governor adjustment box and the speed switch on injector pump was...
Hi,
We just received an M1078a1. The axle shafts were removed for towing and are not with the truck. Does anyone know if the axle shafts for the M1078 and M1078A1 are the same?
Thanks.
Jim
Hello,
I read the other thread about this same issue but I do not believe it is my ECM. Does anyone know how I can troubleshoot this engine to rule it out or the sensors or the pump?
Thanks in advance for your time
Jim
Hi,
My 805B 30KW is finally starting but my field will not flash. After troubleshooting I found my exciter stator and rotor windings have separated. It looks as if they were stuck together because of water or frozen water and somebody tried to start the generator and boom they came apart. The...
Hello,
I have an MEP-805b that we picked up from surplus that will not start unless I apply voltage to the actuator to engage. It will run and the governor light is on that states DC voltage. When the generator is running the speed sensor and actuator lights are not lit. I checked the magnetic...
Hello,
I am replacing injectors on a MEP-007b with the Cat 3306 engine. What special tools if any do I need to remove the injectors?
Thanks in advance for your help.
Jim
I recently purchased a M1088 for mostly spotting trailers and occasionally transporting a lowboy trailer. Is there a way I can lower the suspension, change tires, or any other method I can use to lower the fifth wheel to a more traditional height of 47 to 48 inches?