Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hello All!
I drove the truck on Christmas Day with no problems, everything ran just fine. Today I went to go excerise her again and I noticed that the primary and secondary tanks were both reading 150+. I never even got a chance to leave :(
I'm wondering if you guys think the culprit is the...
So I've noticed recently that when the parking brake is released (the handle all the way down). I can still hear the high pitched tone of low air buzzer/parking brake is still on. The light on the dash is not flashing or steady on and the brake is off.
I have traced the wires and I don't see...
I have been driving around and haven't had any issues. Until the other day, when you put the switch in the brake light mode (one turn to the right) the turn signals do not work. The light comes on at the indicator when u pull or push for the signal but nothing happens. Also the brake lights...
Hey guys!
I know this is going to said way left field but here goes... I just recently bought a m923a2. This morning when Im looking it over I wanted to check all the air in the tires and bring to to the same pressure. When I went to check them I don't any reading. I also pushed the shredder...
Hey Guys.
First off Let me say that I have searched both on this website and using google. I see in one post about it being mentioned, but I couldnt find an outcome or cause. With that said, let me explain the situation.
I have owned this M35A3 for about 6 months now. It has been great and I...
I’m about to lose it.... Before I do, I will explain the issue. I bought the truck about 2 months ago. I’m happy as can be, it’s a great truck.
So one day I noticed the passenger side was slinging grease oil mixture. After reading I see that I need to get in there and replace the seals.
OK...
All,
What type of grease do you all recomend for the front end. I have replaced the wheel seals and bearings on my front axel.
Also, how much grease should I pack in the universal joint on the front axel. And then how much should I put in the houseing that surrounds the UV Joint. I dont...
Another day another question :-P
So the more I drive my new M35A3 the more I would Like to know. So today I was looking over the air brake system and noted a few items.
First I noticed that I would turn the truck off at 120PSI and I would still hear air leaking near the dryer (at least I...
So yesterday evening thru this morning was rain, rain and more rain... I would say anything from showers -->steady --> big fat rain. So I just went out to the truck to see how much water was inside. There is of course a wet floor and a standing puddle on the passenger side. Good news everyting...
Some of you may remember I was on the hunt for a M35A3. Well soon after that thread I located a M35A3 in West Virginia. I contacted the seller and after numerous emails and questions we got the ball rolling.
I work a 3 week schedule and have off 10 days. Of course the seller and I came to an...
Let me take a minute to formally say hello. My name is Andrew and I live in Chesapeake, VA. I have been quietly reading the threads and posts here for about a month. So in other words, I guess you could call it stalking... :D
I am amazed at the stories, advice, warmness, and willingness that...