Search results

I have a 86 m1009. On the fire wall passager side there is a capister running form the third positve terminal to the frist negitive terminal. It consist of three wires One wire goes straight through, THe second wire has a larger orange capister and the thrid has a smaller orange capister...

ok i have a 86 m1009. went to start it yesterday and nothing. tryed it again and burnt the fuseable link on the 24v (pass) side. it the wire on the forth terminal. i think this is the wire that goes to the starter relay. Also after this happened the gen 2 light on the dash is no longer...

I have a 86 m1009. I just changed the fuel filter housing. What is the round white part with a thin foam layer on it. It has two wires coming out of it and is almost flush with the housing. It is some kind of sensor? Mine Is broke and not sure of the parts name or function.

Ok i have a m1009. When i got it about two years ago i put a freeze plug block heater in it KATZ, It worked for about a year and burnt out? Put a new one in and it only lasted for about 3 months. it would just pop the braker to the outlet. so i figured i wasnt installing them right...

ok I have a 86 m1009. The truck will not start when COLD, It will just crank and crank away, once started a huge cloud of whitish gray smoke comes out form exhaust pipes. I have a block heater and that does not seem to help. I know starting fuild is bad, but i have had to use it to get the...

gen 1 light comes on when heater fan is on ( the gen 1 light is very dim) not full red like on starting. is this normal?

what is a safe highway speed for a m1009 and what rpm does it red line at? this weekend im install a tach, temp, oil pressure, and volt gauges, has anyone else installed these ?

i would like to put military hummer tires 37/11.5/16.5 ( i think that the size), but i would like to put the rims and tireson my m1009. frist do they make a adaper to convert the lug pattern form 6 to 8 lugs? if they do male a adapter where can i find them? also will those tires clear for...

is there a specific torque range for the injectors and fuel pump?

when i picked up the m1009 it started fine now it starts then dies right away, then doesnt want to start again u really have to crank it to start it. i change the oil, air and fuel filters plan on buy new plugs and fuel pump any ideas on what the problem mite be

ok i just bought a 85 m1009, when i picked it up it started right up. the next day i really had to crank on it to start it. i change the oil, air filter and fuel filter so far. im going to buy new plugs and fuel pump, tommorw once running it will restart fine, but once it cooled down it...