Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I'm guessing I need to replace my rear main seal. I just want to confirm before I get to far along. It's definitely engine oil. It only leaks during and a little after the engine is running. It also leaks a lot. I lost 8 quarts over 160 miles.
1969 m35a2.
Is there a trick to installing soft tops with a M66 ring on a m35a2? The cab is touching the vertical poles of the ring and the poles are touching the bed. There is no room for the vinyl to slip down below the lip of the bed or cab. The rubber tie down for the bed tarp goes right where the pole...
I have had my mep-803a for about 2 weeks. I got it from government auction with about 2000 hours on the meter. I have been reading here all the posts on cleaning and testing. So far i have changed the oil, oil filter, air filter, and the big fuel filter. I have also been cleaning the...
I have done some searching and i cant find much on the largest tire size where i can still use tire chains on a M35A2. I also don't want to just barely get by. The truck is 100% stock right now. Does anyone have experience with larger than stock tires and chains?
Last night driving home the truck seemed like it started to shake a little. I have felt this before and it has never really lasted more than a few seconds. This time it started getting worse. I decided i would pull off at the next exit. Just when the exit was in sight i could start to hear...
I Started Pulling things apart yesterday. I have a leak between the heads. It does not seem that bad but its on its way now. I ordered the head gasket from Big Mike's http://www.bigmikesmotorpool.com/collections/m35a2-parts/products/head-gasket-set-for-multifuel-engine-5702678 So far i got...