Search results

Perfect! Thanks

Ah, Yes it is clearly on YOUR schematics. It is not on mine. I was pretty sure it was a filter just wanted to know if it was supposed to be there or if it was something someone added on for some unknown reason. Thanks for the info. If you don't mind, can you share the drawing or TM number you...

Hello guys, I have purchased a us shift Quick 2 Transmission controller along with the wiring harness to connect everything from Black Dog Customs. I am installing on a M1097A2. In the process of connecting the harness I realized that I would have to remove a bunch of crap to remove the oem...

You were right! Thanks. I thought I had checked all those wires aready. Turns out the wires were unplugged exactly as suspected. The wire connected to the sending unit actually had the wrong tag on it. Looked like 68A but was difficult to read. Was suspect because it looked like it had been...

Thanks, for your help but I already know where the sender is. If you read my first post, you would know that I am looking for the connection point between 33A and 33B. You can see the connector in the drawing attached to my post. I have an open wire between the sender and the gauge. I need to...

I have already ohmed it out. It is definitely open. ("OL" on my meter) Looking in the schematic it shows another connection between the temp sensor and the gauge. I am looking for that connection. If the drawing is correct, it should be another Packard connector. Need to find that connector to...

Haven't heard anything back yet. Has anyone had this issue or am I the only one? Just trying to find out where the physical connection between wires 33A & 33B is located. Anyone?

Howdy Guys, Working on my Humvee today. Installed new Temperature gauge. (mine was missing) Wired correctly connected to 33A and 27G as per the electrical schematics but it did not work when switched on. I have attached a pic of the device in the schematics for your reference. The problem is...

Here’s another solution. Its another McGyver calling card! :cool: I folded the windshield down on my M1097 for the first time to inspect the gasket and these contacts. This is what I found. It made me laugh but i’m sure it worked. Sometimes you gotta do what you gotta do! FYI that is fine...

Does anyone know what this thing is bolted to the back of my new M1097A2? It looks like some sort of radio or control rack but have no Idea exactly what. Let me know if any of you have thoughts on it. Also is it of any use or value to any of you? As of now, don't think I will have any need for...

The truck sat in my driveway for nearly a week while I was waiting for the batteries. During that time, I spent countless hours on my creeper inspecting it with fine toothed comb. I found numerous loose bolts, wire connections and plugs. I have a long list of things that need to be corrected or...

Status Update I got the old girl to move! It seems it was just too low on fluid. I put nearly 1.5 gallons of fluid in it before my first post. I know it takes more but i did not know how much was left in the system and the tranny cooler is bypassed. Put all that I had in it and was expecting...

I do not doubt that at all. I apologize for being so thin skinned. I do trouble shooting for a living and I suppose I would do the same thing. You have to start with the most obvious to check them off the list.

Um, thanks? I have checked that already. Found a couple of missing u-joint clamps but have replaced them already. Did this before I got the engine to start Not sure if you were inferring that this may be my problem or not. (no connection to wheels) So I'm trying not to be insulted.

It may still be low on fluid, but transfer is definitely in gear.

Let me start by saying I am new to the site. Have been searching and browsing for a while but this is my first post. I recently purchased An M1097A2. It is an Arizona vehicle and appears to be in decent shape. Odometer says low miles (whatever that's worth) With that said it was a non-runner...