Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I got the alternators both tested and GEN 1 alternator was bad the GEN 2 was good. I got a spare off of my 1008 so hopefully that will solve the problem.
I got to it and hooked the batteries up and it fired right up like new. From the time I started to the time I stopped it the GEN 1 light stayed on bright. The GEN 2 light only came on when I let off of the throttle to slow down and even then it was a flicker. I looked at all of the wiring and...
I am going to get it in an hour or so and will let you know how it turns out. I removed the batteries and recharged them over night so I will go at it with good batteries and a demanding attitude at least.
I can get them checked out ASAP; but what do the GEN lights mean? Also is it better to just get two new alternators or will rebuilds go a long way. What can I do to check the alternators to make sure that they are working correctly?
I got my blazer running after it has been sitting for no telling how long and have only driven it twice about 10 miles each time. It did fine both times. Today I drove it to the store and when I went to leave it would not start and the batteries drained very quickly until the starter began to...
Ill check it out now and let you know what I find. I did get the box out and it appears to be ok. Nothing looks burnt or broken but I am gonna clean it with air and reinstall it later as well. Thanks again guys.
I will order the wellmans now and will also check and clean the box. What does the starter relay look like and where is it under the dash? Thanks for the other info it is really helpful.
I have already changed the coolant temp switch and it did not help and I also unplugged it and no luck still. Alot of people say to go with ac delco 60g's and others say wellman 070. Is one better than the other? One of the plugs I pulled out had the tip(a very little piece about the size of...
I do hear the clunk of the relay engaging and the glow plugs get power according to my test light but only for two seconds. When I first got the truck the system did nothing at all. I wiggled some wires attached to the module under the dash(the little black box) and that is when it started...
I am trying to figure out which glow plugs to put in my blazer. I do not operate in cold weather conditions if that helps. Not sure if I can use regular ac delco 60G or if I need something different cause of the 24 volt system. Also when I turn my key on my glow plugs only stay on for about...