Search results

I had meant flywheel bolts, but using new starter bolts every time is good to do because they stretch. Check also check teeth on starter and flywheel.

Dont use starter shims. Flexplate/flywheel may be loose. Check torque. Get new proper bolts and thread seal and torque to spec.

Threw the five used glow plugs that tested good from other truck into the cucv. They were champion brand and had .4 ohms. Cranked 5 times and started right up from cold, had 4 tested bad and changed one that was out of range

Do you have the bracket? If not here is a link to one for sale in US https://www.hillbillywizard.com/cucv-and-k30-parts/cucv-direct-drive-starter-bracket-p-n-14028931/ You should be able to locate 1/4 inch threaded rod or short stud in Europe through an online vendor like Amazon or Alibaba, if...

Put a clear line on return line coming off inj pump, will let you know if there is any air infiltration. Bubbles = air getting somwhere you need to find and fix Check the ohms on all the glow plugs. Lots of bad counterfeit plugs out there now and theyre bad out of the box or fail immediately. I...

Sgammo has several on their site

Sticking caliper put me back in fuel efficiency, but a new filter change never hurts. Wix and Baldwin are the cream IMO We run almost any brand but shy away from Fram

Legal disclaimer: watering down road fuel is tax evasion so this info is for off road use only. If DOT dips tank, same charges as running red offroad fuel You should always run some additive in a db2 and db4 pump, they weren't designed for ULSD and will eat themselves alive. Lots of folks have...

I did the electrical tape too. Make sure to use high grade 3m like super 33 or 88, you'll scoff at the price tag, but it will hold up in weather and temp changes, something few elec tapes can do.

I was just looking at rear window crank handles lol

If you find a civy unit, the gm diesel trucks quit using db2 inj pump after 93 and moved to db4 in 1994 and up. I believe both still have a TCM. Hope this helps.

In, thanks for the opportunity

Doesn't sound like it, these parts are becoming hard to come by and you may have to retrofit what is available.

Follow the wire and inspect it. Ground strap to body and ground strap to frame from negative.

Haha nothing is rusted on the top. The cab needs rust repair around the seal where the top meets the cab, and some other usual body work. I am missing a driver side clear glass for the top.

I need some solid glass also for one side, I forget what side as my top is off for rust repair. One of those sliding listing on eBay is my pair lol

You can use the 120 208 3p feed. Feed shops with phase a and b, feed house with phase b and c. You can change it to shops b and c or vice versa Make sure 220 items like ac, air comp, elec heat, etc run regularly to balance load. Honestly depending on load you could house A-B, shop 1 b-c and...

They are out of stock

Is there a source for a not Asian no name brand pcv valve? I see lots of $50 ones on ebay, but would like to source two delcos or equivalent for my 6.2 vehicles. Thanks!

Nice machine. What engine is in it?