Search results

Yes but in that case you will probably have voltage on the equipment all the time. What I want is for some devices to have voltage only when you start the engine or switch the ignition switch.

Thanks for an answer. Do you have any pics?

Where do you connect into the electrical system so that devices are only powered when the ignition is switched on, e.g. a phone charger. Is it somewhere just behind the "ignition switch" or somewhere else?

How many AMPs do you have? If 400AMP and A/C then this one should be ok: 13013861 / 01-583-7508. I have 1152A1 with similar config and year and it is ok.

Part # 12338596

Here is a reason: I have found a new item in the shops but there is a considerable price disparity, from 15usd (hummerh1parts) to 65usd (ebay) (macmotors ~34usd). What is the reason for this? Is there any chance that the cheapest ones are not original?

Hi. I have replaced serpentine belt 2 months ago. With the new one I drove maybe 100km. I noticed that grooves appeared longitudinally on the smooth side of the belt. Is it ok, or there is something wrong with something?

This instruction is for the old type with line. My is electronic. And in TM-9-2320-387-24-1 I have found: 5-17. SPEEDOMETER DRIVEN GEAR REPLACEMENT Will check what is inside. Thx.

So the only option is to disassemble the TC?

Hi. I have a problem with the speedometer on my m1152a1. What I have tested: 1. I unscrewed the tachometer generator (#12480922) The plates were bent so I squeezed them. 2. I put the pin (Sender Tachometer Generator?) to the drill 3. The moment I switched on the drill, the pin started to...

Please check PM.

Yes. And also parts to assembly hard top.

I have found something like this: And also: In the purple circle, elements are that foam/soft material? But I don't have idea about parts in orange circle. What is it? Do you have any real photos?

Hi. I have a question about some M1165A1B3FK5 parts. I am looking for: C-pillar with all element from picture: Connecting bar and plate: And the side that joins the pillars and roof: Don't know if the element above is directly connected to the roof? I tried to search in...

How long after installation did this tensioner break? Did you have original OEM fitted or Chinese copy for around 60-100usd?

So.... First step is to remove side cover to have better access. You will need such a ratchet spanner and some long extension. I used a steel tube from a fence :) Insert spanner to tensioner. Add extension tube. Lift the tube up and remove belt from this roller: Then you can lower the...

Yes, I have. But give me some time and I will describe everything.

Tensioner and belt replacement in progress: And final effect:

I asked about speedometer :)

Which model do you have?