• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. tuff-truck-guy

    First m1008

    Ok after many hundreds of dollars I've deduced that I either have a fuel pressure problem, or an injector pump problem. It surges a bit on the low side and it seems like it just runs out of fuel on the high side. I'm hoping its just a dirty or collapsed tank screen. If it is not I'm afraid she...
  2. tuff-truck-guy

    First m1008

    got a camper shell!
  3. tuff-truck-guy

    First m1008

    Thank you. I probably will not wet sand it for a few days due to "my fingers have lost their prints "haha and their sore. from sanding the 3-4 layers of paint off. I am planning on painting it a dark emerald green metalic, I cant remember who makes it but its the pre mixed stuff you can get at...
  4. tuff-truck-guy

    First m1008

    Ok so I got her sanded and primed. not a great job but I have never painted anything automotive before exept by rattle can, In which I do a much better job oddly enough.
  5. tuff-truck-guy

    First m1008

    I was wondering if someone would mention that hahahaha:cool: :driver:
  6. tuff-truck-guy

    First m1008

    I installed a new Napa "MECHANICAL" fuel pump and WOW I cant believe the difference it made in power and delivery! I can now fish tail with ease, actually have to "try" not to. HAHA I even barked the tired on the asphalt with no brakes! Again wasnt TRYING to do that..
  7. tuff-truck-guy

    First m1008

    My"custom" spring lift job. Using m 818 front springs.the last picture is the left over springs that id almost bet would do the lift on a 1009 to.
  8. tuff-truck-guy

    First m1008

    ok i'll go get a few
  9. tuff-truck-guy

    First m1008

    Oh and I need to aquire a lift block and some u bolts for the rear as well
  10. tuff-truck-guy

    First m1008

    The seat is just temporary and yes its out of a 880 that I had in the dump ....
  11. tuff-truck-guy

    First m1008

    actually I used 2 on each side and It actually rides smoother, theres almost no flex now but the up and down bounce is way less jarring, my shocks are blown and probably have been since the late 80's haha but It actually rides MUCH better, and seems to be a slight amount more stable on the road...
  12. tuff-truck-guy

    First m1008

    Oh I have almost got my lift done, It doesnt rub under most circumstances, Only minor at full lock with the opposing side in the air. "woo hoo" Many of you may laugh and snicker and such but I used a set of m-818 front springs that I had the 3-4th springs are perfect length and make for aprox...
  13. tuff-truck-guy

    First m1008

    randybill I bought mine off of gsa It was in Oklahoma and wasn't even near the location it was supposed to be at it was on the complete other side of the state 358 miles to be exact.
  14. tuff-truck-guy

    First m1008

    well I got my fuel pump "napa" cost me $18. I want to get a spin on filter and base but my finances at the moment are not allowing for said modification. I am also contemplating leaving the electric pump on as a back up for the mechanical unit, only I'll run it through a toggle switch so its not...
  15. tuff-truck-guy

    First m1008

    well I do want to fix the mec pump and I can definatly see your point as to where a electric pump could have some advantages, but both together dosent seem like it is very benefitial especially all the time being on and making the god awfull racket it makes!
  16. tuff-truck-guy

    First m1008

    Well I think I got very lucky! The truck runs like a champ, I have got the engine oul and filter changed. I have also changed the tranny oil and filter, now fot the t-case and differentials. I have pulled the old seat out and cleaned out the cab "wow" It was terribly dirty under there... Only...
  17. tuff-truck-guy

    First m1008

    Dear lord, this is turning out to be the longest 4 days I've ever had........ wanna go pick up my truck now...........:deadhorse:
  18. tuff-truck-guy

    First m1008

    Skinny I have a set of 37's for new shoes and i have a trans pack w filter 4 the tranny already I am under the assumption that the battery's are there and functional, "only cucv i've seen that said in running condition" ever. With lady luck on my side its just a 50 dollar fuel pump n a $9.50...
  19. tuff-truck-guy

    First m1008

    yep thnx guys I shurley hope it isnt gonna take 1-2 k to get her up and going since i gave so much for it. I was only planning on spending 2500 on upgrades n such max, not to make servicable. Yes im planning on the dh relay mod being right behing a complete liquid change and grease job n filters...
  20. tuff-truck-guy

    First m1008

    Well I bought 1 finally ,haven't seen it yet. 69213 miles. Now 4 going and getting it to see "what all is wrong with her" suposedly its got a bad fuel pump but is running. "I pray that's all it is" Prolly be doing the pickup Monday or Tuesday. I cant believe it went for as much as It did, but...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks