Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have the same problem. No grinding sound, or feel just will not roll backwards. I looked at the parking brake, and loosened the pads. I never thought about looking for grease. I will report back, after the inspection, I am excited!
It all depends... If the time to filter becomes long, time to change to a new filter. It depends where I get the oil. Some is really clean, sometimes, not so much.
These types of starters are very easy to rebuild, and there are kits to re-build 12 v starters. Are there any such parts to re-build our 24 v starters? Has anyone re-built their starter (and lived to tell about it)?
Thanks
The 2 engines are not even close in this setting. The Multifuel horse power peaks at about 2000 RPM, the Ford 460 (while I love that engine) is quoted at over 5000 rpm. In a Deuce, a 460 with stock gearing, is way underpowered.
I have a 1977 RV with a 360 engine. It has the AIR heads, without a catolytic muffler. The air pump seized and I just removed it. This was a time when you would find all kinds of odd combinations i.e. Air heads on pre-smog engines. The Air heads where designed to add outside air to mix with...
I have the dreaded "Rust Hole" in my J-pipe. I just ordered exhaust pipe bends and fittings, and will try to weld up the pipe myself. Has anyone else done this? I cant be that hard? Can it?
Brazing and Soldering are two different techniques. Brazing is usually a bronze alloy, with a Acetyline torch, while soldering is using solder, with a propane torch/Iron. I have used brazing to cover holes well over a 1/2 inch.
I'm courious why you would use the TM's for correct oil? When the Tm's were written there was single weight Oil, now there is so much better oil available. Use a multi weight oil, and call it a day. What am I missing?
WMO modification is Done!, I have the tag and all. Maybe I am just too ready for summer. The cab get so hot. I am thinking with to doors off, it would not be too bad, during the summer.
Ok, so summers a long ways away, but, I am thinking about removing the doors for summer. It is a jeep..kinda. Can I do this? Is it legal? Jeep CJ's run without doors. What about Mirrors? Am I stupid? I seem to remember some discussion about this before, but in searching, I could not find...