Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I found the issue!. The fuel level sensor was not working. After cleaning the fuel sensor the solenoid pulled in and the engine starts perfectly. However I had no voltage after getting the engine to run. I spent most of the day inspecting the wiring from the gen and found some of the terminal...
I received the plugs from 319, Thanks 319, perfect fit. That fixed the starting problem. I had to hold the solenoid back like b2948kevin suggested. The solenoid doesn't pull in and no voltage to the plug. The solenoid is good but I must have a wiring issue or some other problem causing the...
I haven't figured out what to do with the batteries yet. I like the 4HN because it fits nice in the 701 enclosure but it looks like the cost to replace will be at least $150.
has anyone used a 24v battery tender? I found this one online and am thinking it will work but wanted to know what...
I tried to pull out one of the injectors today. I removed the lines and clamp. The injector is stuck good. anybody know how to remove these? is there a special tool?
The two out of three Glows are bad. They are getting 12v and not getting hot. I pulled them out and have an open between the tips. The good one shows something like 30ohms.
I put the good plug in the ones not starting but they just crank. no smoke out the exhaust. No fuel to the cylinder...
My first post on Steel Soldiers.
I just purchased 3 MEP-701a's and want to post my progress and questions.
Gen 1 has 755 hrs
- Battery dead but has a date of 2009 on it.
- Glow plug will not heat.
- Fuel to injector but none in cylinder
Gen 2 has 585 hrs
- No Battery.
- Glow plug will not...