• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. 1 Patriot-of-many

    Wiper blades? My arms are flat, no hook like convention arms

    Thanks guys! I went to NAPA this morning got the right trico ice blades listed in the book and the guy showed me how they would fit in., fit perfectly!
  2. 1 Patriot-of-many

    Wiper blades? My arms are flat, no hook like convention arms

    So which one's am I looking for at the local parts store?
  3. 1 Patriot-of-many

    Wiper blades? My arms are flat, no hook like convention arms

    Needed to replace my wiper blades, there's no hook like regular blades just complete flat on the arms where they attach? What blades do i need? I need them ASAP.
  4. 1 Patriot-of-many

    M1070(HET) Tractors What are second lives/uses????

    WOW! That's one pretrip and posttrip I don't want to do!
  5. 1 Patriot-of-many

    M923A2 CTIS Problem

    Just replace the coils. It's not that hard.
  6. 1 Patriot-of-many

    Transmission wont engage in 5th gear

    It's mounted to the underside of the cab above the transmission, has two wires going to it and piping from both sides. I think I figured it out, I think it's the pressure switch for the wrecker governor. My governor doesn't work, I have to manually set the throttle for wrecker use. I assumed...
  7. 1 Patriot-of-many

    Transmission wont engage in 5th gear

    Hey SIMP, so what is that solenoid that I have under the cab above my tranny on my M936A2?
  8. 1 Patriot-of-many

    Anybody change the thermostats on a 8.3 A2 engine?

    My M936A2 wrecker is overheating, I thought it would be the shutterstat, but the cross over pipe it mounts to and the radiator don't get hot at all while the engine is overheating. It looks like a night mare to change those two thermostats! Anybody change them out and any pointers before I...
  9. 1 Patriot-of-many

    Transmission wont engage in 5th gear

    If you look up on the floor of the cab above the tranny, I believe that is the fifth gear lockup solenoid. I'm betting yours is defective and mine is. Two wires go to it.
  10. 1 Patriot-of-many

    Transmission wont engage in 5th gear

    I have the same problem on my 936A2 wrecker. 5th gear lockup doesn't work, I'm limited to about 52 MPH. I understand there is a 5th gear lockup solenoid up above the transmission, maybe that's our problem. It has two wires going to it, and it's a reach.
  11. 1 Patriot-of-many

    For anyone needing new wheels for your M1009 8 inch wide

    I must of just cut into somebodies profit for used rims......
  12. 1 Patriot-of-many

    For anyone needing new wheels for your M1009 8 inch wide

    Yeah fits perfect on my m1009, my mechanic double checked, and I measured the same backspace as the rims that are on my 86. WVI-62-5806044 these are 4.25 inch backspace 15" rim, 8 inches wide.
  13. 1 Patriot-of-many

    For anyone needing new wheels for your M1009 8 inch wide

    https://www.summitracing.com/parts/WVI-62-5806044/applications I got sick of people trying to sell me used rims at $150 plus shipping as these 8 inch rims are hard to find. Summit has them brand new shipped to you at a little over $100. If you need NEW rims for your M1009 there you...
  14. 1 Patriot-of-many

    M923 NHC250 stalls when stopping. Idle seems low too.

    Thanks guys, now I need to do the grunt work looking for a leak. Thank you for the idle speed knowledge.
  15. 1 Patriot-of-many

    M923 NHC250 stalls when stopping. Idle seems low too.

    How do I set the idle higher on the NHC250? Starts right up, but releasing the throttle suddenly it will die, or driving forward or backward and stopping it will die.. I replaced the big canister filter recently but still have the issue. Any suggestions on a sight glass to install in the...
  16. 1 Patriot-of-many

    Are 5 ton Torque rods the same for the M35A3?

    Thanks guys, I finally found the part number on them and found the part number for the 5 tons, confirmed not the same thank you!
  17. 1 Patriot-of-many

    Are 5 ton Torque rods the same for the M35A3?

    Anybody know? I've been trying to go through the P TM's for both but my brain is malfunctioning.
  18. 1 Patriot-of-many

    M35A3 wheel beadlocks

    I guess I am getting confused . Whatever is and was in the original military tires on an M35A3. Don't run flats act as a beadlock also? Sure seems like it when I Installed a new oring in one of them.
  19. 1 Patriot-of-many

    M35A3 wheel beadlocks

    What if soldier B has a jacked up back too? :) Thanks, I'll have to study the process again on video. The pulling out part looks fairly easy. Chain tire to tree, chain to runflat, use vehicle to pull run flat out. It's the other part with trying to get it into a new tire that scares me. I once...
  20. 1 Patriot-of-many

    M35A3 wheel beadlocks

    Thanks!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks