Search results

Thank jason

It is possible to do because I did it offers more power more torque and is almost a 1, 000 pounds ligther and it sounds really cool

You mean how awsome does it sound driving it will be getting a small amount of dyno mate and I am going to reseal all windows and doors for sound and cold it can get -75 here in fairbanks ak I will try to post more pics of my motor upgrade it took me three months to do and you have to lift the...

5ton motor swap to 6v92ta I put a 6v92ta with a rto9513 tranny in my m813 here in alaska It is a bit of work but the difference in power and torque Are huge I also did away with the brake system and put a hydromax system in Everyone with a military 2.5 or 5ton should look in to this upgrade I...

I got tired of the nhc250 and well pictures are worth a thousand words

There is a small air piston Box just above your front drive shaft it has 4 bolts and a air hose going to it check the hose for hole mine was leaking there.

Do you have a m800 or m900 truck

Well thank you kind sir lol i read the TM and studied alot of drawings and plains on over run gears. I see how they work i made sure it operate's as you suggested thank you for the info. I thought the t-case would be direct drive boy was i wrong i got a m35a2 air cut off switch for t-case. Put...

7417951 CLUTCH ASSEMBLY,FRI does any one know where to get a new set of these

Ok pulled drive shaft off primer axle to t-case to check front drive. it work in reverse but nothing going forward so got to find a 7417951 clutch assem i guess.

It was 2,000.00 in fuel i put 16.00x20 on her with a bed from A35a2 loaded with all my house hold goods that was 10,000 pounds towing a 16' trailer with a CJ-8 on it. up mountains i was averaging 7.86 to 8 mpg flat ground it will average 12 mpg i drive my truck everyday it is cheaper to maintain...

Well i will read the TM but like i said it was binding up and would pop. First time it did it i thought for sure it cracked the case. But 6x6 has never work forward or revers and the popper valves are working as they should. I am still in the army so i have alot more assets to get info from my...

Yep same problem here drove my XM813 from Texas to Alaska stop for fuel put it in to revers and it would bind and then go boom. Put a m35 air switch in the cab to disengage front axle long story short jacked up front drivers tire. Built up air turned truck off engaged air switch put in revers...

I installed a ntc400 pt pump on mine and piped air from air lines to mimic a turbo till i get one.[thumbzup]